O-06-41.f
STATE OF ILLINOIS 11111111111111111111111111111111111111111111111111111111111111111111111111111111
Image# 041034300039 Type: ORD
Recorded: 02/12/2007 at 02:51:20 PM
COUNTIES OF LAKE AND COOK ).SS Receipt #: 2007- 00006831
Total Amt: $3300 Pape i of 39
IL Rental Housing Fund: $0.00
VILLAGE OF DEERFIELD ) Lake County IL Recorder
Mary Ellen Vanderventer Recorder
File6136121
The undersigned hereby certifies that she is the duly appointed Deputy Village Clerk of the .Village of Deerfield, Lake
and Cook Counties, Illinois, and that the attached is a true and accurate copy of
Ordinance 0 -0641 Approving an Amendment to the Signage Plan for Takeda Pharmaceuticals to
Permit Directional Signs Within Takeda Park Including Necessary Sign Modifications `
Dated this December 19, 2006
JE IFER 9 DAVIS
Deputy Village Clerk
Submitted by:� Village of Deerfield
850 Waukegan Road
Deerfield, IL 60015
VILLAGE OF DEERFIELD
LAKE AND COOK COUNTIES, ILLINOIS
ORDINANCE NO. 0 -06 -41
AN ORDINANCE APPROVING AN AMENDMENT
TO THE SIGNAGE PLAN FOR TAKEDA PHARMACEUTICALS TO
PERMIT DIRECTIONAL SIGNS WITHIN TAKEDA PARK INCLUDING
NECESSARY SIGN MODIFICATIONS
WHEREAS, the Plan Commission of the Village of Deerfield has held a public hearing on
the application of Takeda Pharmaceuticals North America, Inc. (the "Petitioner ") for approval of. (1)
an amendment to the signage plan for the One Takeda Parkway property located at the northeast
corner of Lake Cook Road and Saunders Road and legally described on Exhibit A attached hereto
(the "Subject Property") to allow certain unlit directional signs identified and described on Exhibit B
attached hereto (the "Directional Ground Signage ") to be located and maintained on the Subject
Property as an amendment to the Special Use Industrial Planned Unit Development of the Subject
Property in.the I -1 Office, Research and Restricted Industrial District, and (2) approval of a sign
modification to allow the Directional Ground Signage to exceed two (2) square feet in area; and,
WHEREAS, said public hearing was held on July 27, 2006 pursuant to public notice duly
given and published as required by law and conforming in all respects, in both manner and form,
with the requirements of the Zoning Ordinance of the Village of Deerfield; and,
WHEREAS, the Plan Commission, after considering the proposed amendment to the
approved signage plan for the Subject Property, the proposed sign modification and the evidence and
supporting materials offered at said public hearing, has submitted Its written report and
recommendation to the President and Board of Trustees of the Village of Deerfield that an
amendment to the approved signage plan for the Subject Property should be approved as an
amendment to the Special Use Industrial Planned Unit Development of the Subject Property in the I-
1 Office, Research and Restricted Industrial District to allow the Directional Ground Signage to be
installed and maintained on the Subject Property, and that said sign modification should be further
approved to allow the Directional Ground Signage to exceed two (2) square feet in area; and,
WHEREAS, the President and Board of Trustees of the Village of Deerfield find that said
anendment to the approved sign plan and sign modification should be approved for the Subject
Property authorizing the Directional Ground. Signage, all in accordance with the plans, drawings and
exhibits presented by the Petitioner and attached hereto as Exhibit B hereof;
NOW, THEREFORE, BE IT ORDAINED BY THE PRESIDENT AND BOARD OF
TRUSTEES OF THE VILLAGE OF DEERFIELD, LAKE AND COOK COUNTIES, ILLINOIS, in
the exercise of its home rule powers, as follows:
SEC'T'ION 1: That the President and Board of Trustees of the Village of Deerfield do hereby
find that the requested amendment to the approved signage plan for the Subject Property complies
with the requirements and standards set forth in Article 9.02 -C PUD; entitled I -1 Office, Research,
Industrial District Planned Unit Development, and in Article 13 -11 of the Zoning Ordinance of the
Village of Deerfield..
SEC'T'ION 2: That an amendment to the approved signage plan for the Subject Property. is
hereby authorized and approved as an amendment to the Special Use Industrial Planned Unit
Development of the Subject Property in the I -1 Office, Research and Restricted Industrial District
authorizing and permitting certain unlit directional ground signs identified and described on Exhibit
-2-
B attached hereto (the "Directional Ground Signage ") to be located and maintained on the Subject
Property, all in accordance with the plans, drawings and exhibits listed on Exhibit B attached hereto.
SECTION 3: That a modification from the regulations set forth in Article 9, Signs, of the
Zoning Ordinance of the Village of Deerfield is hereby approved for the Subject Property to permit
said Directional Ground Signage to exceed two (2) square feet in area, all in accordance with the
plans, drawings and exhibits listed on Exhibit B attached hereto.
SECTION 4: That the approval and authorization of -said amendment to the approved
signage plan for the Subject Property is hereby granted subject to the following additional conditions,
regulations and restrictions: (i) that the construction, maintenance and use of the unlit directional
ground signs hereby approved shall be in accordance with the supporting documents, materials and
exhibits attached hereto and made a part hereof as Exhibit B; (ii) except as otherwise provided
herein, the construction, maintenance and use of the Subject Property shall be in accordance with the
Final Development Plan heretofore approved as a Special Use Planned Unit Development of the
Subject Property in the I-1 Office, Research and Restricted Industrial District, including the signage
plan for the Subject Property as hereby amended; (iii) continued compliance by the Petitioner with
all other applicable provisions of the Zoning Ordinance of the Village of Deerfield:
SECTION 5: That the amendment to the approved signage plan for the Subject Property
hereby approved and authorized as an amendment to the Special Use Planned Unit Development of
the Subject Property shall be binding'. upon and_ inure to the benefit of Petitioner and Petitioner's
successors, grantees, transferees and assigns, and any violation of the conditions hereinabove set
forth by Petitioner or its successors, grantees, transferees or assigns shall authorize the revocation of
the amendment Special Use hereby authorized.
-3-
SECTION 6: That the Village Clerk is hereby authorized and directed to record this
Ordinance in the office of the Recorder of Deeds of Lake County, Illinois at Petitioner's expense.
SECTION 7: That this Ordinance, and each of its terms, shall be the effective legislative act
of a home rule municipality without regard to whether such Ordinance should: (a) contain terms
contrary to the provisions of current or subsequent non - preemptive state law; or, (b) legislate in a
manner or regarding a matter not delegated to municipalities by state law. It is the intent of the
corporate authorities of the Village of Deerfield that to the extent that the terms of this Ordinance
should be inconsistent with any non - preemptive state law, this Ordinance shall supersede state law in
that regard within its jurisdiction.
SECTION 8: That this Ordinance shall be in full force and effect from and after its passage,
approval and publication in pamphlet form as provided by law.
PASSED this 5th day of September , 2006.
AYES: Benton, Feldman, Rosenthal, Seiden, Struthers, Wylie (6)
NAYS: None (0)
ABSENT: None (0)
ABSTAIN: None (0)
APPROVED this 5th da)
ATTEST:
Village Clerk-
EXHIBIT A
THAT PART OF THE SOUTH HALF OF FRACTIONAL SECTION 31, TOWNSHIP 43 NORTH,
RANGE 12, EAST OF THE THIRD PRINCIPAL MERIDIAN, DESCRIBED AS FOLLOWS:
COMMENCING AT THE INTERSECTION OF THE WESTERLY RIGHT OF WAY LINE OF THE
NORTHERN ILLINOIS TOLL HIGHWAY WITH THE NORTHERLY RIGHT OF WAY LINE OF
LAKE COOK ROAD; THENCE NORTH 15 DEGREES 50 MINUTES 00 SECONDS EAST,
ALONG THE WESTERLY RIGHT OF WAY LINE OF THE NORTHERN ILLINOIS TOLL
HIGHWAY, A DISTANCE OF 962.38 FEET; THENCE NORTH 77 DEGREES 54 MINUTES 12
SECONDS WEST, A DISTANCE OF 110.96 FEET; THENCE NORTH 64 DEGREES 08
MINUTES 06 SECONDS WEST, A DISTANCE OF 298.74 FEET; THENCE NORTH 80
DEGREES 28 MINUTES 32 SECONDS WEST, A DISTANCE OF 320.96 FEET; THENCE
NORTH 69 DEGREES 06 MINUTES 40 SECONDS WEST, A DISTANCE OF 178.11 FEET;
THENCE NORTH 83 DEGREES 37 MINUTES 21 SECONDS WEST, A DISTANCE OF 275.48
FEET; THENCE NORTH 69 DEGREES 42 MINUTES 36 SECONDS WEST, A DISTANCE OF
217.07 FEET; THENCE NORTH 22 DEGREES 24 MINUTES 11 SECONDS WEST, A
DISTANCE OF 209.24 FEET; THENCE NORTH 89 DEGREES 57 MINUTES 48 SECONDS
WEST, A DISTANCE OF 738.37 FEET; THENCE NORTH 00 DEGREES 00 MINUTES 33
SECONDS EAST, A DISTANCE OF 151.19 FEET; THENCE SOUTH 62 DEGREES 24
MINUTES 31 SECONDS WEST, A DISTANCE OF 129.34 FEET; THENCE SOUTH 69
DEGREES 01 MINUTES 01 SECONDS WEST, A DISTANCE OF 200.52 FEET TO A POINT ON
THE EASTERLY RIGHT OF WAY LINE OF SAUNDERS ROAD (STATE AID ROUTE 41);
THENCE SOUTHERLY ALONG A CURVED LINE, BEING THE EASTERLY RIGHT OF WAY OF
SAID SAUNDERS ROAD (STATE AID ROUTE 41), CONCAVED EASTERLY, HAVING A
RADIUS OF 7589.50 FEET, AN ARC DISTANCE OF 733.43 (CHORD BEARS SOUTH 02
DEGREES 59 MINUTES 32 SECONDS EAST, A DISTANCE OF 733.15 FEET); THENCE
SOUTH 05 DEGREES 46 MINUTES 00 SECONDS EAST, ALONG THE EASTERLY RIGHT OF
WAY OF SAID SAUNDERS ROAD (STATE AID ROUTE 41), A DISTANCE OF 627.89 FEET;
THENCE SOUTH 09 DEGREES 32 MINUTES 36 SECONDS EAST, ALONG THE EASTERLY
RIGHT OF WAY OF SAID SAUNDERS ROAD (STATE AID ROUTE 41), A DISTANCE OF
150.32 FEET; THENCE SOUTH 51 DEGREES 02 MINUTES 05 SECONDS EAST, ALONG THE
EASTERLY RIGHT OF WAY OF SAID SAUNDERS ROAD (STATE AID ROUTE 41), A
DISTANCE OF 45.18 FEET (RECORD) TO THE NORTHERLY RIGHT OF WAY OF SAID LAKE
COOK ROAD; THENCE NORTH 89 DEGREES 59 MINUTES 44 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF 180.00 FEET
(RECORD); THENCE SOUTH 86 DEGREES 45 MINUTES 58 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF .175.29 FEET
(RECORD); THENCE NORTH 89 DEGREES 59 MINUTES 04 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF 275.00 FEET
(RECORD); THENCE SOUTH 88 DEGREES 44 MINUTES 34 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF 630.16 FEET
(RECORD); THENCE NORTH 89 DEGREES 58 MINUTES 15 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF 348.27 FEET
(RECORD); THENCE NORTH 84 DEGREES 24 MINUTES 19 SECONDS EAST, ALONG THE
NORTHERLY RIGHT OF WAY OF SAID LAKE COOK ROAD, A DISTANCE OF 427.32 FEET,
TO THE POINT OF BEGINNING, IN LAKE COUNTY, ILLINOIS.
Exhibit B
Documents Comprising Amendments to the Signage Plan for Takeda
Pharmaceuticals at the Northeast Corner of Lake Cook Road and Saunders Road
1. Site - Signage Location Plan, sheet EG -OS. 1, dated 4 -3 -06 by TVS Architects.
2. Building 1 Level 01- Location Plan, sheet EG -01.1, dated 11 -7 -05 by TVS
Architects.
3. Building 2 Basement - Location Plan, sheet EG -02.13, dated 11 -7 -05 by TVS
Architects.
4. Garage Level 01- Location Plan, sheet EG -10, dated 1 -16 -06 by TVS Architects.
5. Garage Level 02- Location Plan, sheet EG -11, dated 1 -16 -06 by TVS Architects.
6. Garage Level 03- Location Plan, sheet EG -12, dated 1 -16 -06 by TVS Architects.
7. Site Directional (Large), Sign Type EXT.04, sheet G.9, dated 7 -13 -06 by The
Douglas Group.
8. Site Directional (Small), Sign Type EXT.05, sheet G.10, dated 7 -13 -06 by The
Douglas Group.
9. Loading Dock Bay Identity, Sign Type EXT.07, sheet G.12, dated 7 -13 -06 by The
Douglas Group.
10. Building Address, Sign Type EXT.08, sheet G.13, dated 7 -13 -06 by The Douglas
Group.
11. No Smoking Sign, Sign Type EXT.10, sheet G.13C, dated 7 -13 -06 by The
Douglas Group.
12. No Trespassing Sign, Sign Type EXT.11, sheet G. 13D, dated 7 -13 -06 by The
Douglas Group.
13. No Fishing Sign, Sign Type EXT.12, sheet G.13E; dated 7 -13 -06 by The Douglas
Group.
14. Building Identity, Sign Type EXT. 13.1, sheet G. 1317, dated 4 -5 -06 by The
Douglas Group.
15. Building Identity, Sign Type EXT.13.2, sheet G. 13G, dated 4 -5 -06 by The
Douglas Group.
16. Clearance Hit Bar, Sign Type PKG.01, sheet G.27, dated 7 -13 -06 by The Douglas
Group.
17. Clearance Hit Bar (Large), Sign Type PKG.02. 1, sheet G.28, dated 7 -13 -06 by
The Douglas Group.
18. Clearance Hit Bar (Small), Sign Type PKG.02.2, sheet G.29, dated 7 -13 -06 by
The Douglas Group.
19. Clearance Hit Bar, Sign Type PKG.02, sheet G.30, dated 7 -13 -06 by The Douglas
Group.
20. Clearance Hit Bar, Sign Type PKG.02, sheet G.30A, dated 7 -13 -06 by The
Douglas Group.
21. Overhead Directional (Suspended), Sign Type PKG.03, sheet G.31, dated
7 -13 -06 by The Douglas Group.
22. Overhead Directional (Wall Mounted), Sign Type PKG.04.1, sheet G.32, dated
7 -13 -06 by The Douglas Group.
23. Overhead Directional (Wall Mounted), Sign Type PKG.04.2, sheet G.32A, dated
7 -13 -06 by The Douglas Group.
24. Level Identity, Sign Type PKG.06, sheet G.36, dated 7 -13 -06 by the Douglas
Group.
25. Stairwell Identity, Sign Type PKG. l0, .sheet G.40, dated 7 -13 -06 by the Douglas
Group.
26. Reserved Parking Sign (Panel Only), Sign Type PKG. 12.1, sheet G.43, dated
7 -13 -06 by The Douglas Group.
27. Reserved Parking Sign (Post and Panel), Sign Type PKG.12.2, sheet G.43A,
dated 7 -13 -06 by The Douglas Group.
28. Area of Rescue Identity, Sign Type PKG. 17.1,.sheet G.45C, dated 7 -13 -06 by The
Douglas Group.
29. Area of Rescue Identity, Sign Type PKG.17.2, sheet G.45D, dated 7 -13 -06 by
The Douglas Group.
30. Van Park_ ing Identity ,-. Sign Type PKG.18, sheet G.45E, dated 7- 13 -06.by The
Douglas Group.
R
D
P
N
A
L
K
J
N
c
F
E
D
B
A
' 1 4 5 8 7 B 9 10— 11 - -- 12 1 13 U 15 18 r t7 -- 1B —
O,�.aQ•
11 I 1) 11 1l 1R 1R 1) 1 1.
_o
U
B
z
A I
Cc
— 6
O
v s__
V
tii.l.['
is
� :e o�
�v�oao
o � oo
�. � ov�o�
z► ,���Q.,
A :aTar �T�tlecrq
=- �TOTOMTq�gTp�O,
:e...:.
q ?p ?s s s
o
T. T.
°_9g4T4TATa�eq
voo: o 00-----
- -- ---
.
�
ZACPI
i
°a
elo1psoio 0 0 o p• p e
°
o e o e o
�'��
��� \Q`Y r,
rlD _ " "����% i�
• •
♦ofoi a
♦p O O
o .. .- 1 �D ��°
'i" ��r
a o�°
� •� :::�p
o �
a p� ,
�.
!-
I�
��
_ �r'
.•fir
O
^ /,!':
_
n
_
ii ..
♦O♦
O O
�
�
° Op
O
' ice„'►
fil]
F� O
'HARMACEUTICALS
-owl
-!NORTH
AMERICA HEADQUARTE RS
_o
U
B
z
A I
Cc
— 6
O
z ] 4 1 5 8 1 B B 10 1 11 1 12 13 1 14 15 1 15 1 17 le t
R
r"
o.a.r
. sr. s .rr.rnsaeauert.a�raermaac�r.r.r
P OfORR1OaaGL6rr4uem16— - F
KEYNOTELEGEND
Irr gg e
- - '_----------- a__ N
At
s]CO�W ry O __
T
/� l4� � o \'/ �'j,yyll a _ _/r '••'(R city �7 -_ --
L L D +ap t'' as .G ,� > O " "-• L
i d
� ll" Br,, e�R D Br•ra, 5)m� C1y„ Yb N ®L .
� � L 11 �� ,•,� A �� d,•,k � a
//� • ri o sz \ tllht
� na�a a c � ••-
RF� _ _ ` (••, �!� N
+•�,t _ 1 as, �ru ' ' Tacs ar to-r� �£'b rr ws i•`
7 / O ,
O c
O° Oo°
_.` �r _ _ N
O
tar PLAN
ro-r calm E
jN. cwom�s m
c
TAKEDA PHARMACEUTICALS
NORTH AMERICA HEADQUARTERS
DEEVEID, n
Bddf1n9 tUvd 0RDcafiM PtaN 9
emnr maew
EG -01.1
1 2 3 I 4 1 a 1 a 1 7 1 a I a I to 1 11 1 o 13 1 14 15 1 15 17 13 eeo�oro
R
�4�f
1A X9Ml1rLrAVatAMX W-
meammmaweu
t)AJ - 0 ^V(F— q 1
&- 6 a 06 30
pcG2 • o- D(p —�{I
�.e 3 � ��
U
W
W
1'
/-�
r lu n .z 14 14 15 l0 77 le
R
it01�1 RCJtit, cAlaoc U�P3� K
t e W
U-9 H
EI2n e 612: •
e
KEY PLAN
LAE
MUM E
W.W Far Bid
_._._ _ --- _._ ----- --------------------- .--- ------- _._ ------- ----- _ D
mmoava®e ra
ra'L�a>(a
TAKEDA PHARMACEUTICALS c
NORTH AMERICA HEADQUARTERS
DERFW. IL
d
EG -10
xo
1 2 3 4 5 1 6 7 8 B 10 tt ro 15 14 t5 1R 17 18 �+?
QA,j .
Z
F
O
d
w
O
arrr.r.... -mr�r
.:r.rrti
sr.u.....no.amrtuocaa.or� ao>znca�.r.r.r
rrr.rr.r..r...w.rrs.a . rfr+r rrr'
.a.....- ..ra n.ra..a..r
o+o.arm.morr<.amman.o�o P
KEYNOTE LEGEND
N
L
K
J
t e W
U-9 H
EI2n e 612: •
e
KEY PLAN
LAE
MUM E
W.W Far Bid
_._._ _ --- _._ ----- --------------------- .--- ------- _._ ------- ----- _ D
mmoava®e ra
ra'L�a>(a
TAKEDA PHARMACEUTICALS c
NORTH AMERICA HEADQUARTERS
DERFW. IL
d
EG -10
xo
1 2 3 4 5 1 6 7 8 B 10 tt ro 15 14 t5 1R 17 18 �+?
QA,j .
Z
F
O
d
w
O
1
R
P
N
L
K
N
a
F
E
0
8
A
u
2 3 4 5 1 a 1 7 a 9 1 10 1 11 12 1 13 1 14 1 15 18 17 to
' R
4O{01191t3E1L W I16�t�R�u'RK
. /��((5SLL66 araim.n�acwr
, Q
r �s.•Y•.4rr.rrrrr/rrrr
rr.pyrr•
a•r+••rr•.m.amum�a. •nc�srnW.•r
r�...r•r.•r. urrr.r.rrr.rrw.rr
•a•rr -.•..s usrrrr
••orarum�rau®rc.o® P
KEYNOTE LEGEND
N
i W
A m
c�
G2 „\ \
cm
b b e
8 i
K
go ® .
�— o•.ots1.r� � e-
-i ryV.I L 3 � I I -4 oy.QWO4I t I -F 4
m4 r GUT 251 � �
CUT N
FR
a'
o,
F
KEY PLAN MET
mmpai. 05M
gym
mma E
mnsm
bVm! Fa BIT
D
it �a oa+a®oe •r
TakP.da.
C
TAKEDA PHARMACEUTICALS
NORTH AMERICA HEADQUARTERS o
DEERFIELD, n_
m g
Gard Lmi 024.0a m Plan z
ao® O
y
EG -11 ^
..e
r
2 9 4 1 5 1 8 1 7 I 8 1 9 1 10 it 12 13 1 14 15 15 17 15 O
z a a a a a e iu o 1 1a 'u ,a ,a it m
I
i
I
1
e m
'� \. �IIIi �I II II I II I!I �,����a I I Ia IIILII� II(III�I�II
b � b
III III ! I I III II I A
a LWF a s F a
� are��prq -► � b
a a
/ CD11 GRR A p b ® am
-- - - - - ---
cs,� e
m
R
rafo,tlLmmoc �r�cs.a.
n
._r srr�wr�._..s.- asersr
_-- irrvrw� wrirrr.r..r r.r�a
�r.rrw+r►
sr��r- �s.+- wvtwmouar:�.mtn�c.�esr.-.r
-- r.r•r..�a nrr.rr.�.r.r�rrr
- ._.rrr era u.rr -r
ovsa�mae_ia�rman.e® P
KEYNOTELEGEND
N
Y
K
H
� '6Sd'U�'f4ac
D
auml .y � F
KEY PLAN
E
MV
D
r. IlmYr®C Y
T�
C
NORTHEAMERICA HEADQUARTERS
DaPJW, IL
B
LBYB� (�i.00d�Dfl �8D
1q.r . orar
r
rra
1 7 A a c R 7 8 8 10 11 19 1a 14 15 78 17 78 wnm
0-0(4- W
r 3o
Z
0
F
0
O
This Sign Type. includes Item Number(s): 51.00
.o
o =
Q
o =
m is
:o
Ir 1'
Ea EQ.
[3-
0
Del iveries/
.....Services Entrance
at Saunders
Visitor Parkin:
}
f S
k
r
r
sL r__ tr
y.� s
-
''s�_
err. Sts
"� Jrt .-' , spaiSa -fa r,at , r.— 74- r y21 :'.�`y
4' -0'
� Front Elevation
Scale: 3 /4e= V -0"
2' 8'
f
Z Side View
Scale: 3/4 "= V
Notes*
1. Sign cabinet to be 1/8" thick alu-
minum cladding seamlessly fobricat- "
ed around internal aluminum frame
structure and painted to match P -3
on both faces and sides.
2. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V-2. Arrow to match V -3.
3. Copy to be applied vinyl to match
V -2. Typestyle: Optima Medium,
U/I c.
4. logo to be applied vinyl to match
V -1.
S. Vertical accent bar to be stainless
steel with a polished U.S. #8 finish
on all exposed sides.
6. All exposed surfaces to be finished
smooth, primed and painted with
an egg -shell finish.
All ledges and corners to be slightly
eased on crisp, clean, 90° returns.
7. The Signage Contractor is to coat
any dissimilar metals with a bitumi-
nous coating to prevent galvanic
action.
8. Sign cabinet to be mounted onto
poured into. place, cost concrete
foundation. Size and depth of foun-
dation to be engineered by structur-
al engineer licensed with the State
of Illinois to meet maximum local
wind load requirements and
detailed on stamped shop drawings.
9. The Signage Contractor is responsi-
ble for the complete fabrication and
installation of all components of this .
signoge and is to include the cost to
obtain all permits necessary to
install and maintain it. The Signage
Contractor is to submit detailed shop
drawings indicating all fabrication
and installation components. Actual
mounting situations may vary by
location. Mounting locations may
have additional piping, cables or
other material that may hinder instal-
lation. The Signage Contractor is
responsible to field verify each loca-
tion for all existing conditions of the
building and site prior to submitting
detailed shop drawings and_ copy
layouts to determine if modifications
or additional support is required.
NO INTERNAL
ILlrIiIE%TNfION
p,A. o- 0(0- yt
&,r. 13 -1 e6 3o
The Douglas I Group
3040 Post Oak: Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No. Date Issue. Description
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. M rights reserved.
No part of this document may be reproduced or
ufilized ,, any form without prior written authorize•
Lion from The Douglas Group. This d=mentserves
as o device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.04
Site Directional (Large)
DIG Project Number:
2404.3.13
Issue Date:
07e 13.06
G.9
This' Sign Type includes Item Number(s): S 103, S 106, S 145, S 177 & S 179
P
to
e �� Takeda
t
Visitor Entrance .
Lake Cook /. F
= I- 94ToIhwa
Q- 1 -94 South. to }
O'Hare F
Front Elevation
Scale: 3/4 "= V -0"
9'
I ft 6•
2 Side View
Scale: 3/4 " =1' -0"
Notes.
1. Sign cabinet to be 1/8" thick alu-
minum cladding seamlessly fabricat-
ed around internal aluminum frame
structure and painted to match P -3
on both faces and sides.
2. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V-2. Arrow to match V -3.
3. Copy to be applied vinyl to match
V-2. Typestyle: Optima Medium,
U /Ic.
4. Logo to be applied vinyl to match
V-1.
5. Vertical accent bar to be stainless
steel with a polished U.S. #8 finish
on all exposed sides.
6. All exposed surfaces to be finished
smooth, primed and pointed with
an egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90a returns.
7. The Signage Contractor is to coat
any dissimilar metals with a bitumi-
nous coating to prevent galvanic
action. .
8. Sign cabinet to be mounted onto
poured into place, cast concrete
foundation. Size and depth of foun-
dation to be engineered by structur-
al engineer licensed with the State
of Illinois to meet maximum'local
wind load requirements and
detailed on stamped shop drawings.
9. The Signage Contractor is responsi-
We for the complete fabrication and
installation of all components of this
Signage and is to include the cost to-
obtain all permits necessary to
install and maintain it. The Signage
Contractor is to submit detailed shop
drawings indicating all fabrication
and installation components. Actual
mounting situations may vary by - .
location. Mounting locations may
have additional piping, cables or
other material that may hinder instal-
lation. The Signage Contractor is
responsible to field verify each loca-
tion for all existing conditions of the
building and site prior to submitting
detailed shop drawings and copy
layouts to determine if modifications
or additional support is required.
30
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston. I Washington, DC
TVS&A
Thompson, Ventulett, Stainback $
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No. Date Issue Description
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written outhordo-
Lion from The Douglas Group. This document serves
as a device to communicate design intent. only
Fabrication and installation of the products repro•
sented herein will be derived from shop drawings
produced by the contracted fobricator.
Takedc Pharmaceutical
Headquarters
Sign Type EXT.05
Site Directional (Small)
D I G Project Number:
24043.13
Issue Date:
07.13.06
G.10
V
OF
RO
RON-
Aft
-This Sign Type includes Item Number(s): S 149; S 150; S 151, S188/ S189, 11009, 11010, 1 101 1, 11012,-11013, 11014, B20100; B20101,
B20102; 820134, 820135 & B20136
0
N
�
1 Front Elevation
Scale: 11/2'= 1' -0"
8. -0.
0
Q
N
EQ. E0.
4A�Location Elevation, East Side
"r' Scale: 3/16 " = 1' -0"
.! Location Elevation, Northeast Side
Notes
1. Panel to be 1/8" thick aluminum
pointed to match P -3 on face and
edges.
2. Copy to be silkscreened to match
P -2. Typestyle: Optima Medium,
all caps.
3. All exposed surfaces to be pointed/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish. -
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and finished smooth.
4.. Sign to be mounted flush to wall
with threaded studs and secured
with silicone adhesive.
5. The Signage Contractor is to field
verify oil existing conditions of each
location prior to submitting detailed
shop drawings and copy layouts.
bxi. 07 ow
if 6 y 36 3v
The DouglaslGroup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I. Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No: Date Issue Description
1 04.03.06 Bulletin 12 Reimcl Drawing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights mserved.
No part of this document may be reproduced or
utilized In any form without prior written outhorzo-
Hon from The Douglas Group. This document serves
as o device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived hom shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.07
Loading Dock Bay Identity
DIG Project Number.
24043.13
Issue Date:
07.13.06
G.12
E0.
E0.
�
1 Front Elevation
Scale: 11/2'= 1' -0"
8. -0.
0
Q
N
EQ. E0.
4A�Location Elevation, East Side
"r' Scale: 3/16 " = 1' -0"
.! Location Elevation, Northeast Side
Notes
1. Panel to be 1/8" thick aluminum
pointed to match P -3 on face and
edges.
2. Copy to be silkscreened to match
P -2. Typestyle: Optima Medium,
all caps.
3. All exposed surfaces to be pointed/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish. -
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and finished smooth.
4.. Sign to be mounted flush to wall
with threaded studs and secured
with silicone adhesive.
5. The Signage Contractor is to field
verify oil existing conditions of each
location prior to submitting detailed
shop drawings and copy layouts.
bxi. 07 ow
if 6 y 36 3v
The DouglaslGroup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I. Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No: Date Issue Description
1 04.03.06 Bulletin 12 Reimcl Drawing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights mserved.
No part of this document may be reproduced or
utilized In any form without prior written outhorzo-
Hon from The Douglas Group. This document serves
as o device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived hom shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.07
Loading Dock Bay Identity
DIG Project Number.
24043.13
Issue Date:
07.13.06
G.12
This Sign Type includes Item-Number(s): 5112
t4' -5"
i I I
TA E
!"--ONE. K DA.
7 Front Elevation
Style: 1 1/2 '= 1' -0"
A
T
o Front Elevation
Scale: 3/16'= 1' -0"
Notes .
1. Letierforms to be 3/8" thick solid
plate stainless steel with a vertically
brushed U.S. #4 finish on the face
and - returns. Typestyle: Optima
Medium, all caps.
2. Reversed letterforms backside cover
to be second surface applied vinyl
to match V -5.
3. All edges and corners to be slightly
eased on crisp, clean, 90a returns.
4. Letterforms to be flush mounted to
glass with thin mil VHB tape and'sili-
cone adhesive. letterforms to be
applied to first surface and backside
cover to be aligned with first surface
letterforms and applied to second .
surface.
4. The Signage Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
shop drawings and copy layouts.
6 fo
The. DouglaslGrouD
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett,.Stainback $
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604 -
Revisions
No. Date Issue Dews rwa
1 04.03.06 Bulletin 12 Revised Dmdg
Drawn by: Duane W. farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authorizo-
Lion from The Douglas Group. This document serves
.as a device to communicate design intent only.
Fabrication and installation of the products repre.
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.08
Building Address
DIG Project Number:
24043.13
Issue Date:
07.13.06
G91.3
This Sign Type includes Item Number(s): S107A & S173A_ Notes I The Douglas lGroup
0
N
1' -6'
E0 4' ED.
m o o:':
4 Plan View
Scale:
314-19 -01
1' -6'
E0: Ea.
t /8•
1 Front Elevation
Scale: 3/4 1 ' -0"
Z
Side View
SQ . 3/4" =1' -0"
1. Sign panel to be 1/8' thick alu-
minum pointed to match P -3 on
face and edges.
2. Symbol to be applied vinyl to match
- three (3) colors. Circle and slash to
match V-1. Cigarette symbol to
match V-2. Circle background to
match V-3.
3. Copy to be applied vinyl to match
V-2. Typestyle: Optima Medium,
all caps.
4. :Post to be 3" x 3" square aluminum
tubing painted to match P -3 on all
sides. Post to be capped on top.
5. Mounting brackets to be 3" x 3
angled aluminum painted to match
P-3. Brackets to be fully welded to
backside of panel and secured to
post with non - corrosive, countersunk
screws.
6. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90" returns
and finished smooth.
7. Entire sign assembly to be mounted
into direct poured concrete foundo-
tion that is flush with grade, slightly
sloping up to sign post to prevent
standing water. Size and depth of
foundation to be engineered by
structural engineer licensed with the
State of Illinois to meet maximum
local wind load requirements and
detailed on stamped shop drawings.
8. The Signage Contractor is required
to remove all excavated soil and
dean surrounding area effected by
installation.
9. The Signage Contractor is responsi-
ble to field verify each location for
all existing. conditions of the site
prior to submitting detailed shop
drawings and copy layouts to deter-
mine if modifications or additional
support is required.
a,A - 0 -ono -
qp-B /1 :6
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC .
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal
Revisions
No. Date Issue Descriptia
1 04.03.06 Bulletin 12 New Droviq
2 05.01.06 Bulletin 12 ReYW Lao
Drawn by- Duane W. Farthing
Checked by: lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authoriza-
tion from The Douglas Group. This doaraent serves
as a device to communicate design intent only.
Fabrication and installation of the products repre.
sented herein will be derived from shop drawings
produced by the.contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.10
No Smoking Sign
DIG ProjedNumber:
24043.13
Issue Date:
07.13.06
Go 1 3C
This Sign Type includes Item Number(s): S107B & S173B
t�
N
N
N
r
1'-6'
%71 Front Elevation
Scole: 3 " =1-"
; d--
EQ. E0.
_NO.Trespassing
%':Authorized
Vehicles Only
Premises
Patrolled by ,=
Security
NO Soliciting:',
/;1 Front Elevation
Scale: 3/4 "= V-W
Notes
1. Sign pane: to be 1 /8" thick alu-
minum painted to match P -3 on
face and edges.
2. Copy to be applied vinyl to match
V-2. Typestyle: Optima Medium,
all caps.
3. Mounting brackets to be 3" x 3"
angled aluminum painted to match
P-3. Brackets to be fully welded to
backside of panel and secured to
post with noncorrosive, countersunk
screws.
4. All exposed surfaces to be pointed/
t /8• silkscreened are to be finished
l3' smooth, primed and painted with an
egg -shell finish.
q side View
v7 Scale: 3/4" =1' 0"
All edges and corners to be slightly
eased on crisp, clean, 900 returns
and finished smooth.
S. Entire sign assembly to -be mounted
to existing 3" x 3" square aluminum
post.
6. The Signage Contractor is required
to remove all excavated soil and
dean surrounding area effected by
installation.
7. The Signage Contractor is responsi-
ble to field verify each location for
all existing conditions of the site
prior to submitting detailed shop
drawings and copy layouts to deter -
mine if modifications or additional
support is required.
c.�
C) IA- O _0(o -4 i
'6lt -�D3a
Tile Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal
Revisions
No. Date Issue Description
1 04.03.06 Bulletin 12 New Drawing
Drawn by: Duane W. FoAing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved
No parr of this document may be reproduced or
utilized in any form without prior written outhorizo,
lion from The Douglas Group. This dooment serves
as a device to communicate design Went only
Fabrication and installation of the products reps
sented herein will be derived from shop drawings
produced by the contracted fabricator.
;IT
Takeda Pharmaceutical
Headquarters
Sign Type EXT.I I
No Trespassing Sign
D I G Project Number.
24043.13
Issue Date:
07.13.06
Ge 1 3D
This Sign Type includes Item Number(s): ' S 105A, S 105B & S 105C
Ed 9' Ea
Ea 3' E0.
P m
o o
3 Plan View
Scale: 3/4 '= 1'-0'
:e
e
e �
e
N
a
N
x Y
F 7
�7 Front Elevation
Scale: 3/4 "= V -0"
2 Side Yew
Scale: 3/4 "=1' -0"
,e
a
o.
Notes
I. Sign panel to be 1 /8" thick. alu-
minum painted to match P -3 on
face and edges.
2. Symbol to be applied vinyl to match
three (3) colors. Circle and slash to
match V-1. Fishing, swimming and
skating symbol to match V -2. Circle
background to match V -3.
3. Copy to be applied vinyl to match
.V-2- Typestyle: Optima Medium,
all cops.
4. Post to be 3" x 3" square aluminum
tubing painted to match P -3 on all
sides. Post to be capped on top.
5. Mounting brackets to be 3" x 3"
angled aluminum painted to match
P -3. Brackets to be fully welded to
backside of panel and secured to
post with noncorrosive, countersunk
screws.
6. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and pointed with on
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and finished smooth.
7. Entire sign assembly to be mounted
into direct poured concrete foundo-
tion that is flush with grade, slightly
sloping up to sign post to prevent
standing water. Size and depth of
foundation to be engineered by
structural engineer licensed with the
State of Illinois to meet maximum
local wind load requirements and
detailed on stamped shop drawings.
8. The Signage Contractor is required
to remove all excavated soil and
clean surrounding area effected by
installation.
9. The Signage Contractor is responsf
ble to field verify each location for
all existing conditions of the site
prior to submitting detailed shop
drawings and copy layouts to deter-
mine if modifications or additional
support is required.
c)
) 3 C
The Douglas Groun,
3040 Post Oak Blvd., Suite 510
Houston, Teams 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DiC
TVS&A
Thompson, Ventulett, Stain6o& &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions
No. Dote Issue Description
1 04.03.06 Bulletin 12 New Drawing
Drawn by: Duane W. Farthing
Checked by- Lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authorize•
Lion from The Douglas Group. This document serves
as a device to communicate design.ident only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.12
No Fishing Sign
D I G Projed Number.
24043.13
Issue Date:
07.13.06
G*13E
This Sign Type includes Item Number(s): 5184 & 81.85-, Notes I The Douglas Group
-BUILD,-ING - t
7 Front Elevation
Scale: 1 1/2 -= V -0-
0
n:o
e
�A Location Elevation
Scale: 3/16'= 1' -0"
rii�Locotion Elevation
v Scale: 3/16 " = 1'-0"
4 Location Elevation -
1. Letterforms to be 3/8" thick solid
plate aluminum with a polished U.S.
#8 finish on the face. Returns to
have a sandblasted finish.
Typestyle: Optima Bold, all caps.
2. All edges and corners to be slightly
eased on crisp, clean, 90" returns.
3. Letterforms to be mounted flush to
wall with threaded studs and
secured with silicone adhesive.
4. The Signage Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
shop drawings and copy layouts.
&,g 14 6,30
3040 Post.0ak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No. Date Issue Descriptioe
1 04.03.06 Bulletin 12 New Drown
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
O The Douglas Group. All rights reserved.
Na part of this document may be reproduced or
utilized in any form without prior written outhoriza,
tion from The Douglas Group. This document serves
as a device to communicate design Went only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.13.1
Building Identity
D I G Project Number.
24043.13
Issue Date:
04.05.06
Ge 1 3F
This Sigr. Type includes Item Number(s):. S187
S-b'
m
__B1U1L1J1N(;
Front Elevation
Scale: 1 1/2 "= 1' -0"
Notes
1. Letterforms to be 3/8" thick ocrylic
painted to match P -2 on the face
and edges. Typestyle: Optima
Bold, all caps.
2. All exposed surfaces to be pointed/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 900 returns
and finished smooth.
3. Letterforms to be mounted 1 1/2"
off split face CMU wall with thread-
ed studs set in a 2-part epoxy.
Exposed studs to be inserted thru
sleeves painted to match P -7.
A. The Signage Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
shop drawings and copy layouts.
%ft"\ Location Elevation, South Side
`r' Scale: 3/32 " = P -0"
e
J�
1
C9
�
t.g 15 t 30
The- Doucrlas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions
No. Date Issue Descrk9oa
1 04.03.06 Bulletin 12 New Dmeing
2 . 04.05.06 Revision to 12 Revised Drawing
Drawn by. Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director. Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized In any form without prior written outhorizo,
tion from The Douglas Group. This doarment serves
as a device to communicate design intent only.
Fabrication and installation of the product repre
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type EXT.13.2
Building Identity
D I G Project Number.
24043.13
Issue Date:
04.05,06
G913G
This- Sign Type includes Item Number(s): G 104, G 110B & G 144A
m
m N
s
.e+
m
s
0
E
8' -0'
Yt; CLEARANCE 71_ �.
3�
f
(--I1 front Elevation
1 Scale: 3/4 "= P -0"
CLEARANCE 7 ° -0" F
location Elevation
v Scale: 3/8 '= 1' -0'
1
2
(A� Side View
Scale: 3/4 "=1' -0"
Notes.
1. Tube to be 8" dia. industrial PVC,
with capped and sealed ends, paint,
ed to match P -3 on all sides.
2. Copy to be applied vinyl to match
V -2. Typestyle: Optima Bold, all
caps.
3. Tube to be suspended from sign
structure with 1/8" thick minimum,
stainless steel aircraft cable and
binding clamps. The aircraft cable is
attached to a set of heavy -duty, non-
corrosive eye hooks, one anchored
into the structure and a second one
securely fastened to angled alu-
minum bracket set inside tube and
running the length of the tube.
A. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and finished smooth.
5. Tube to be securely anchored to
overhead ceiling structure with
heavy duty, noncorrosive fasteners.
The Signage Contractor is to coordi-
note with Project Architect to verify
the minimum clearance height and
to field verify each garage entry
opening to determine exact
cabling /hardware length to match
correct clearance height.
6. The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
4,.6 I(0 � 30
The Douglas Group -
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainbock &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal
Revisions
No. Date Issue Description
1 02.20.06 Revised layout
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
m The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authariza-
tion from The Douglas Group. This doament serves
as o device to communicate design intent only.
Fcbrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.01
Clearance Hit Bar
D I G Project Number.
24043.13
Issue Date:
07e 13.06
G.27
' This Sign- Type includes Item Number(s): G101 & G159
B'
%i�1 Plan View
7' -D'
Notes
1. Sign structure to be 1/8" thick alu-
minum seamlessly fabricated around
internal frame structure and painted
to match P -3 on both faces and
sides. Structure to be fully welded to
1 " thick mounting plates with
through bolts.
2. Copy to be applied vinyl to match
V -2. Typestyle: Optima Bold, all
caps.
8' I 1'4r 1 8' I T-0• I r
24' -0'
GARAGE ENTRANCE
s
m = :CLEARANCE 7'- 0'! :; :a` �$ ` CLEARANCE 7'-
�r.
e o
:o
_ y
m
1 Front Elevation, G159
Scale: 3/8 "= V -0"
69
6' -0' Feld Verify
Center over Roadway 1
DO NOT ENTER
24' -0'
4
GARAGE EXIT ONLY
6' -8' field Verify
Center over Roadway
®^ DO NOT ENTER ®;
�1
4 Akernate cut, G101 .
1
2
5
3
4
3. Tube to be B" dia. industrial PVC,
with capped and sealed ends, point-
ed to match P -3 on all sides.
A. Copy to be applied vinyl to match
V 72. Typestyle: Optima Bold, all
caps.
5. Tube to be suspended from sign
structure with 1/8" thick minimum,
stainless steel aircraft cable and
binding damps. The aircraft cable is
attached to a set of heavy -duty stain.
less steel eye hooks, one anchored .
into the structure and a second one
securely fastened to angled alu.
minum bracket set inside tube and
running the lbngth of the tube.
6. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and.finished smooth.
Z Side View le =
V
7. Entire sign assembly to be securely
anchored to exterior garage wall
with heavy -duty, noncorrosive fasten-
ers. The Signage Contractor is to
coordinate with Project Architect to
verify the minimum clearance height
and to field verify each garage entry
opening to determine exact
cabling /hardware length to match
correct clearance height.
8. The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
() J. o -
•,g 1--� t 30
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston Washington, DC
TVS8tA
Thompson, Ventulett, Stainback S
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions
No. Date Issue Description
1 04.03.06 Bulletin 12 Revised LaW
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this dowment may be reproduced or
utilized in any form without prior written authorize•
lion from The Douglas Group. This document serves
as o device to communicate design intent only
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.02.1
Clearance Hit Bar (Large)
DIG Project Number:
24043.13
Issue Date:
07.13.06
G.28
6' -0' field Verify 6
6' -r Field Verify
Center over Roadway C
Center over Roadway
ZT
"' €
€2 a.
e o
:o
_ y
m
1 Front Elevation, G159
Scale: 3/8 "= V -0"
69
6' -0' Feld Verify
Center over Roadway 1
DO NOT ENTER
24' -0'
4
GARAGE EXIT ONLY
6' -8' field Verify
Center over Roadway
®^ DO NOT ENTER ®;
�1
4 Akernate cut, G101 .
1
2
5
3
4
3. Tube to be B" dia. industrial PVC,
with capped and sealed ends, point-
ed to match P -3 on all sides.
A. Copy to be applied vinyl to match
V 72. Typestyle: Optima Bold, all
caps.
5. Tube to be suspended from sign
structure with 1/8" thick minimum,
stainless steel aircraft cable and
binding damps. The aircraft cable is
attached to a set of heavy -duty stain.
less steel eye hooks, one anchored .
into the structure and a second one
securely fastened to angled alu.
minum bracket set inside tube and
running the lbngth of the tube.
6. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90' returns
and.finished smooth.
Z Side View le =
V
7. Entire sign assembly to be securely
anchored to exterior garage wall
with heavy -duty, noncorrosive fasten-
ers. The Signage Contractor is to
coordinate with Project Architect to
verify the minimum clearance height
and to field verify each garage entry
opening to determine exact
cabling /hardware length to match
correct clearance height.
8. The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
() J. o -
•,g 1--� t 30
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston Washington, DC
TVS8tA
Thompson, Ventulett, Stainback S
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions
No. Date Issue Description
1 04.03.06 Bulletin 12 Revised LaW
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this dowment may be reproduced or
utilized in any form without prior written authorize•
lion from The Douglas Group. This document serves
as o device to communicate design intent only
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.02.1
Clearance Hit Bar (Large)
DIG Project Number:
24043.13
Issue Date:
07.13.06
G.28
This Sign Type includes Item Number(s): G 1 OOA & G1 . 61
8-
1' -2'
r
T -r
8.
�is1 Plan Yew
v Scale: 3/8 "= 1' -0"
16' -0-
'aT o
:o
m
Front Elevation, G100A �
' Scale: 3/8 " =1' -0"
UV Field Verh
Center over Roadway
16' -0'
I
iw1 Alternate Layout, G161
`t Swle: 3/8 " =1' -0"
Notes
The Douglas Group
1. Sign structure to be 1/8" thick alu
minum seamlessly fabricated around
3040 Post Oak Blvd., Suite 510
internal frame structure and pointed
to match P -3 on both faces and
sides. Structure to be fully welded to
1 " thick mounting plates.
Houston, Texas 77056
713.961.3311
713.961.1256 fax
2. Copy to be applied vinyl to match
V-2. Typestyle: Univers 67 Bold
Houston I Washington, DC
TVS&A
Condensed, all caps.
3. Tube to be 8" dia. industrial PVC,
with capped and sealed ends, point-
ed to match P -3 on all sides.
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
4. Symbol to to be applied vinyl to
match' two (2) colors. Circle to
match V -1. Horizontal bar to
Village Submittal,
match V-3.
5. Tube to be suspended from sign
structurewith 1/8" thick minimum,
stainless steel aircraft cable and
Revisions
No. Date Issue Descriptron
1 04.03.06 Bulletin 12 Revised Loput
binding clamps. The aircraft cable is
attached to a set of heavy -duty stain-
( 1W less steel eye hooks, one anchored
r� into the structure and a second one
securely fastened to angled alu-
minum bracket set inside tube and
running the length of the tube:
6. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and pointed with an
egg -shell finish.
Drawn by: Duane W. Farthing
-'
All edges and corners to be slightly
A Side View eased on crisp, clean, 90" returns
Scale: 3/8 "= V-W and finished smooth.
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
7. Entire sign assembly to be securely
anchored to overhead ceiling strut-
g
ture with heavy duty fasteners. The
Signage Contractor is to coordinate
with Project Architect to verify the
minimum cleaYance height and to
Field verify each garage entry open-
ing to determine exact cabling /hard
ware length to match correct clear -
®flee Douglas Group. M rights reserved.
No parr of this document may be reproduced or
utilized in any form without prior written outhoriza-
lion from The Douglas Group. This document serves
m a device to communicate design intent only.
Fabrication and installation of the products repro-
rented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
once height.
Headquarters
8. The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
Sign Type PKG.02.2
Clearance Hit Bar (Small)
D I G Project Number:
24043.1.3
Issue Date:
DAA.
07.13.06
G.29
This Location includes Item Number(s): G 161 & G I -
Notes
D4. o- Ito
The Douglas! GrGup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Vii.1loge Submittal.
Revisions
Nis Date tssoe Descriptma
1 D4.03.06 Bulletin 12 Revised layout
Drawn by: Duane W. farthing
Checked by: Lee Jones
Project Designer: Lee Jones.
Project Director: Lee Jones
m The Douglas Group. All rights reserved.
No part cf this document may be reproduced or
utilzed in any form without prlor written outhoriza-
tion from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabrication and installation of the products repro-
rented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.02
Clearance Hit Bar
Location, West Entrance
DIG Project Number.
24043.13
Issue Date:
0%.13.06
G,930
This Location includes Item Number(s): G 101 & G l OOA
GARAGE EXIT ONLY K''f GARAGE ENTRANCE
TENTER 0- _ . A DO MOT ENTER A::: _ rt CA13 Akl `C er
Notes
�- g.
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
Na Date Issue Descriptin
1 04.03.06 Bulletin 12 New Dra*
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
O The Douglas Group. M rights reserved
No part of this document may be repoduced or
utilized in any form without prior written authoriza-
tion from The Douglas Group. This dmment serves
as a device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop dromngs
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.02
Clearance Hit Bar
Location, East Entrance
D I G Projed Number.
24043.13
Iswe Date:
07.13.06
G*30A
This Sign Type includes Item Number(s): G 102A, G 102B; G 102C, G-1 10A, G 1 16, G 144B; G 147; G 15.0, G1511-G157, G 158; G162,-G202,
G209, G214, G246, G247, G250, G251, G259,..G260 & G262
81 -V
5
Front Elevation 6
Scale: 3/4 "= P -0"
4
U,
EQ.
S 1 6' 1 1 1 6' 1 5'
2
a 3
.j Panel Detail
d Scale: 3/4 " =1' -0"
t'A Alternate Layout
`t Scale: 3/4 " =1' -0"
S
6' 13'
s'-o•
3' t 6' t 5'
GAlternbte Layout
Scale: 3/4 "= 1' -0"
2 Side View
Scale: 3/4 "= P -0"
a
a
13
0
M
.r
a:
6 location Elevation
Scale: 3/8 "= V-0'
e+. Q7 a, Vo
Notes
Panel to be 3/4" thick industrial
PVC painted to match one (1) color
on the face and edges. Color to
match the appropriate level as fol-
lows:
Level 1 to match P -1
Level 2 to match P -4
Level 3 to match P -5
2. Copy to be applied vinyl to match
V -3. Typestyle: Optima Bold, all
caps.
3. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V -3. Arrow to match V -2.
4. Symbol to be applied vinyl to match
two (2) colors. Background to match
V-1. Bar and outer border to match
V -3.
5. Mounting bracket to be 1 /8" thick
aluminum channel painted to match
one (1) color and attached to panel
with noncorrosive, tamper - resistant
fasteners painted to match some
color. Color to match the appropri-
ate level as follows:
Level 1 to match P -1
Level 2 to match P -4
Level 3 to match P=5
6. Bose cap to be 1 1/4" wide x 1 /4"
thick black rubber permanently
attached to bottom of panel.
7. Complete sign assembly to be sus-
pended from ceiling with 1 /8" thick
minimum, stainless steel aircraft
cable and binding damps. The air-
craft cable is attached to a set of
heavy -duty, noncorrosive eye hooks,
one anchored into the ceiling and a
second one securely fastened to. .
mounting bracket. The aircraft cable
to`.be positioned in a triangulated
pattern to prevent the suspended
sign cabinet from swinging freely.
B. Ali exposed surfaces to be painted
are to be finished smooth, primed
and painted with an egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90a returns
and finished smooth.
9. Entire sign assembly to be securely
anchored to overhead ceiling struc-
ture with heavy-duty, noncorrosive
fasteners. The Signage Contractor is
to field verify each location to deter-
mine exact cobling/hardware length
to match specified clearance height.
l0.The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
The Douglas l Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston ( Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No. Date Issue Destripticn
1 04.03.06 Bulletin 12 Revised Latest
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written outhodzo
Bon from The Douglas Group. This doammnt serves
as a device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.03
Overhead Directional
(Suspended)
D I G Project Number:
24043.13
Issue Date:
07.13.06
G.31
This' Sign Type includes Item Number(s): G1 03A, G1 03B & G333
5' 1 6'
r I 6' 1 5'
F
VARK''EXIT -�
�1 Front Elevation
Scale: 3 /4 1' -0"
EQ. EQ.
Y 1 6'� I
I 6' I 5'
- EXIT FAR :RIGHT
ip
r a
` '�' � -rte- - •;�+:,• —it r� ,�- - .F�s- �c'� -. s ;�' - 7--'� - `K r - � �-- �_ I �. -s � - '`
� _ _ _ 'g� i '� f C � - x'`r,, -• :�.-, Z r, �. �..._i_3 F � � r` 4-4. r' w c.i "?`f
T�NTE3
a:
1 Alternate Layouts
Scale :3 /4 V -0"
�- PARK EaCIT
Location Elevation
v Scale: 3/8 "= 1 ' -0'
Notes
1. Panel to be 1/e" thick aluminum
pointed to match one (l) color on
the face and edges. Color to match
the appropriate level as follows:
Level 1 to match P -1
Level 2 to match P -4
Level 3 to match P -5
2. Copy to be applied vinyl to match
V-3. Typestyle: Optima Bold, all
caps.
3. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V-3. Arrow to match V-2.
4. Symbol to be applied vinyl to match
two (2) colors. Background to match
V-11. Bar and outer border to match
V 3.
5. All.exposed surfaces to be painted
are to be finished smooth, primed
and painted with an egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90° returns
and finished smooth.
6. Sign to be mounted flush to wall or
T-beam with thin mil VHB tape and
silicone adhesive.
7. The Signage Contractor is to field
verify each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
p_ p(D �( I
�P,
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle. Street, Suite 400
Chicago, Illinois 60604
Villicige Submittal,
Revisions
No. Date Issue Description
1 04.03.06 Bulletin 12 Revised layout
Revised Si Designation
Drawn by: Duane W. Farthing
Checked by: lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
O The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written outhoriza.
lion from The Douglas Group. This cimment serves
as a device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.04.1
Overhead Directional
(Wall Mounted)
DIG Project Number:
24043.13
Issue Date:
07.13.06
G.32
I •
M
WOO
0
This Sign Type includes Item Number(s): G 105A, G 105D & G 105F
Front Elevation
Scale: 3/4 "= V -0"
3 Location Elevation
Scale: 3/8 "= V -0'
a�
Notes
Panel to be .l /8" thick aluminum
painted to match one (1) color on
the face and edges. Color- to match
the appropriate level as follows:
Level 1 to match P -I
Level 2 to match P -4
Level 3 to match P -5
2. Copy to be applied vinyl to match
V -3. Typestyle: Optima Bold, all
caps.
3. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V-3. Arrow to match V -2.
4. All exposed. surfaces to be painted
are to be finished smooth, primed
and painted with an egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90e returns
and finished smooth.
5'. Sign to be mounted flush to T-beam
with thin mil VHB tape and silicone
adhesive.
6. The Signage Contractor is to field
verily each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
-D A.A- ()-0(0-44[
Z;6. -
The DouglaslGroup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DG
TVSBA
Thompson, Ventulett, Stainlaack 8f
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Re*ions
No. Date Issue Desciptioo
1 04.03.06 Bulletin 12 New Drawing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
® The Douglas Group. M rights reserved.
No part of this document may be reproduced or
ufilfzed in any form without prior written outhorizo-
Non from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabricatfon and installation of the products repre-
sented herein will be derived 6om shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.04.2
Overhead Directional
(Wall Mounted)
D I G Project Number.
24043.13
Issue Date:
07.13.06
G-032A
ED.
E0.
3 Location Elevation
Scale: 3/8 "= V -0'
a�
Notes
Panel to be .l /8" thick aluminum
painted to match one (1) color on
the face and edges. Color- to match
the appropriate level as follows:
Level 1 to match P -I
Level 2 to match P -4
Level 3 to match P -5
2. Copy to be applied vinyl to match
V -3. Typestyle: Optima Bold, all
caps.
3. Arrow to to be applied vinyl to
match two (2) colors. Circle to
match V-3. Arrow to match V -2.
4. All exposed. surfaces to be painted
are to be finished smooth, primed
and painted with an egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90e returns
and finished smooth.
5'. Sign to be mounted flush to T-beam
with thin mil VHB tape and silicone
adhesive.
6. The Signage Contractor is to field
verily each location for final ceiling
heights and all existing conditions
prior to submitting detailed shop
drawings and copy layouts.
-D A.A- ()-0(0-44[
Z;6. -
The DouglaslGroup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DG
TVSBA
Thompson, Ventulett, Stainlaack 8f
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Re*ions
No. Date Issue Desciptioo
1 04.03.06 Bulletin 12 New Drawing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director: Lee Jones
® The Douglas Group. M rights reserved.
No part of this document may be reproduced or
ufilfzed in any form without prior written outhorizo-
Non from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabricatfon and installation of the products repre-
sented herein will be derived 6om shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.04.2
Overhead Directional
(Wall Mounted)
D I G Project Number.
24043.13
Issue Date:
07.13.06
G-032A
M
>-This Sign Type includes Item. Number(s):. G 108; G 1 18,. G 154,: G 164, G203, G215, G256 & 265
0
r
n
0
-j Front Elevation
Scale:
11 /2 "= V -0"
a
0
Z.
1 I
�l
2 Location Elevation
Scale: 3 /8 V -0"
Notes
1. Panel to be 1/8" thick aluminum
P ! to match one (1) color on
Z face and edges. Color to match
the appropriate level as follows:
Level 1 to match P -1
Level 2 to match P -4
Level 3 to match P -5
2. Number and copy to be applied
vinyl to match Y -3. Typestyle:
Optima Bold, all caps.
3. All exposed surfaces to be pointed/
sitkscreened are to be finished
smooth, primed and painted with an
eggshell finish.
AI! edges and corners to be slightly
eased on crisp, clean, 90" returns
and finished smooth.
4. Sign to be mounted flush to
wnll /column with thin mil VHB tape
and silicone adhesive.
5. The Signoge Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
shop drawings and copy layouts.
4,6 C�4 t 3 D
The ' Douglas l Grmip
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVSBrA
Thompson, Ventulett, Stainback 8e
Associates, Inc.
209 .South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions _
No. Date Issue Description
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. Al rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authorizao-
non from The Douglas Group. This dnonment serves
as o device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.06
Level Identity
D j G Project Number:
24043.13
Issue Date:
07.13.06
G.36
E9.
E9.
-j Front Elevation
Scale:
11 /2 "= V -0"
a
0
Z.
1 I
�l
2 Location Elevation
Scale: 3 /8 V -0"
Notes
1. Panel to be 1/8" thick aluminum
P ! to match one (1) color on
Z face and edges. Color to match
the appropriate level as follows:
Level 1 to match P -1
Level 2 to match P -4
Level 3 to match P -5
2. Number and copy to be applied
vinyl to match Y -3. Typestyle:
Optima Bold, all caps.
3. All exposed surfaces to be pointed/
sitkscreened are to be finished
smooth, primed and painted with an
eggshell finish.
AI! edges and corners to be slightly
eased on crisp, clean, 90" returns
and finished smooth.
4. Sign to be mounted flush to
wnll /column with thin mil VHB tape
and silicone adhesive.
5. The Signoge Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
shop drawings and copy layouts.
4,6 C�4 t 3 D
The ' Douglas l Grmip
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVSBrA
Thompson, Ventulett, Stainback 8e
Associates, Inc.
209 .South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal.
Revisions _
No. Date Issue Description
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. Al rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authorizao-
non from The Douglas Group. This dnonment serves
as o device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.06
Level Identity
D j G Project Number:
24043.13
Issue Date:
07.13.06
G.36
1
This Sign Type includes Item.Number(sj: G1,28A, G149A, G15- 2A,.G225A; G227; :G249A, G253,.G254A, 313A, 332A & 335A
1
1
1
try
S 4'
!
r
i
0
y
N -
N -
n
1 front Elevation
Scale: 3 "= V -0"
iSide View
Scale: 3'= 1' -0"
�I
e
r�
eg Location Elevation
�7 Scale: 3 /8 "= P -0'
Notes
1. Panel to be 1/4' thick exterior
grade photopolymer plate with
raised copy and Grade 2 Braille,
painted to match one (1) color on
the face and edges. Color to match
the appropriate level as follows:
Level 1 to match P -1
Level 2 to match P-4
Level 3 to match P -5
2. Copy to be raised .8mm and tip -
screened to match P -6. Grade 2
Braille to be raised .8mm, tipped to
achieve a domed surface, and
pointed to match background.
Typestyle: Optima Medium, all
cops.
3. Copy to be raised .8mm and tip-
screened to match P -6. Typestyle:
Optimo Bold, all caps.
A. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90" returns -
and finished smooth.
5. Sign to be mounted flush to wall
with thin mil VHB tape and silicone
adhesive. Sign to be mounted at 5'.
On to center of panel A.F.F. and at
3" from the strike side of door.
6. The Signage Contractor is to field
verify all existing conditions at each
location prior to submitting detailed
sh-6p drawings and copy layouts.
�k 1
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal
Revisions
No. Date Issue Description
Drawn by: Duane W. Farthing
Checked by-. Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
uttlized in any form without prior written authoriza-
tion from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.10
Stairwell Identity
D I G Projed Number.
. 24043.13
Issue Date:
07.13.06
rv.,dri
This Sign Type includes Item Number(s): G 132, G 133, G 134, G232, G233, G234, G318 8k G3.19
a
r
v
54
I
P 0 0
HICLE
1 Front Elevation
Style: 3 "= V -0"
2 Side View
Scale: 3"= 1' -0"
2 Side View
Scale: 314 "= P -0"
�o
Notes-
The Douglas I Group
1. Panel to be 1 /8" thick aluminum 3040 Post Oak Blvd., Suite 510
pointed to match P -3 on face,
edges and back., Houston, Texas 77056
713.961.3311
2. Copy to be applied vinyl to match 713.961.1256 fax
V-2. Typestyle: Optima Medium,
all caps. Houston I Washington, DC
3. Mounting brackets to be 3" x 3"
angled aluminum pointed to match TVS&A
P -3. Brackets to be fully welded to Thompson, Ventulett, Stainback &
backside of panel and secured to Associates, Inc.
post with noncorrosive, countersunk 209 South LaSalle Street, Suite 400
screws.
Chicago, Illinois 60604
4. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and. painted with on
Village Submittal
egg -shell finish.
Rev
All edges and corners to be slightly No.
1 Date Bulletin Description
eased on crisp, clean, 90' returns
and finished smooth. 1 04.03.06 u�etin 12 Revised Layout
5. Sign to be mounted flush to wall
with thin mil VHB tape and silicone
adhesive. Sign to be mounted at 5'-
0" to bottom of panel A.F.F.
6. The'Signage Contractor is to field
verify all existing conditions prior to
submitting detailed shop drawings
and copy layouts.
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director. Lee Jones
® The Douglas Group. All rights reserved.
No part of this document may be reproduced or
utilized in any form without prior wriffen authorize
Hon from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabrication and Installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.12.1
Reserved Parking Sign
(Panel Only)
D I G Project Number:
24043.13
Issue Date:
_ L4 07.13.06
-g Ge43
This Sign Type includes Itein Number(s): G106, G 107, G1 11-, 6.112; GI-13, G1 14, G1 15' G 131, _Ga 351- G 136; G 138; G 139, G 140, G 141,
G 14.2, G 1 -43, G 145, G 146, G205, G206, 6207, .G208; G210, G211, G212, G231, G235, G236, G238, 6239, 6240, G241; G242, G243, G244,
G245, G300, G301, G302, G303, G304, G3051 G306, G317, G320, G322, G323, G324, G325, G326, G327, G328, G329. & G330
e -
N
e
0
N
En.. 9' EQ.
Efl. 3' EQ.
o ':o 0
4
° m o o.
ie� 3Plan View
Scale: 3/4 "= 1' -0'
EQ. EA.
1 Front Elevation
Scale: 3/4 "= 1' -0"
Side View
Scale:3 /4e 1' -0"
Ci
-e
w
:o
"-- �HYBRI D
lr
:VEHICLE
�--- PARKING
- . ONLY
VIOLATORS.
WI LL BE TOWED.. i
�j��ternate Layout
Scale. 3/4 " =1' -0"
Notes
l.- Panel to be 1/8" thick aluminum
` painted to match P -3 on face,
edges and back.
2. Copy to be applied vinyl to match
V-2. Typestyle: Optima Medium,
all caps. -
3. Post to be 3" x 3" x square alu-
minum tubing painted to match P -3
on all sides. Top of post to be
capped.
A. Base plate to be 9" x 9" x 1/4"
thick aluminum painted to match P-
3 on top and edges. Plate to be
fully welded to post.
5. Mounting brackets to be 3" x 3"
angled aluminum pointed to match
P -3. Brackets to be fully welded to
backside of panel and secured to
post with noncorrosive, countersunk
screws.
6. All exposed surfaces to be pointed/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90" returns
and finished smooth.
7. Entire sign assembly to be mounted
to concrete floor thru heavy -duty nuts
and anchor bolts embedded in floor.
Any exposed threads above nuts to
be cut off. All hardware to be point-
ed to match P -3.
8. The Signage Contractor is to field
verify all existing conditions prior to
submitting detailed shop drawings
and copy layouts.
EF•g a� x'30
The Douglas Group .
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
. Houston. I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite-400
Chicago, Illinois 60604
Revisions
No. Date Issue Description
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer: Lee Jones
Project Director: Lee Jones
® The Douglas Group. Ali rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authorize•
Ton from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabrication and installation of the products repre-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.12.2
Reserved Parking Sign
(Post and Panel)
D j G Project Number:
24043.13
Issue Dale:
07.13.06
G 0.'43A
This Sign Type- includes !tern Number(s):_ G127C, GUI 53C, G248C & G255C
- 4' -0'
21h" 1 3"
I NX ESCUIE
FE
. . . . . . . . . . . . . . . . [Ek. Q) T I DFI\\
(--I1 Front Elevation
1 Scale: 1 1/2'= V-0"
3 Location Elevation
Scale: 3/8 1' -0"
Notes
Sign cabinet to be 1/8" thick alu-
minum cladding seamlessly fabricat-
ed around internal aluminum frame
structure and painted to match P -3
on both faces and sides.
Sign cabinet to be internally illumi-
nated by 10mm high-output C.L.
Designer° C.L. 71- 7100aK white
neon tubing with 30 mA remote
transformers, with sufficient neon to
provide bright, even illumination of
sign face. All electrical connections
of lighting system from cabinet to
remote transformers and primary
power supply to be through back of
cabinet and be contained in appro-
priate conduit or wireways to meet
all electrical codes. The Signage
2 Side View
Contractor is to provide the appro-
priate conduit and insulators for all
penetrations and all penetrations
are to be completely sealed and
watertight.
The EGL Company, Inc.
100 Industrial Road
Berkeley Heights, New Jersey
07922
Phone 908.508.1111
Fax 908.508.1122
www.egl- neon.com
Estimated Power Supply
Requirements:
j #)- 20 AMP 110v or 277v dedicat-
ed lines, incorporated into building
EMS.
NOTE: This sign is to be con-
nected to the Emergency
Lighting System.
The Signage Contractor to provide
all required remote transformers and
electrical connections and to coordi-
nate primary electrical to each loco-
tion with the General Contractor.
Sign cabinet to have access panel
for maintaining lighting hardware.
Panel to be weather -proof sealed
with countersunk, tamper resistant,
non - corrosive fasteners painted to
match background.
2. Letterforms to be I/4" thick translu-
cent.milky white acrylic with a matte
finish on the first surface.
Typestyle: Optima Bold, all caps.
Letterforms to be solvent glued to on
additional 114" thick back diffuser
panel for mounting. Laminated pieces
to be push4hru routed face of sign
can and the back diffuser panel to
be mechanically fastened thru blind
studs on interior side of sign can.
3. Square to be 1/4" thick translucent
milky white acrylic with applied vinyl
to match V -6 on face and edges.
Symbol to be reversed out to show
milky white acrylic.
Square to be solveni, glued to an
additional 1/4" thick back diffuser
panel for mounting. Laminated pieces
to be push -thru routed face of sign
con'and the back diffuser panel to
be mechanically fastened thru blind
studs on interior side of sign can.
4. All exposed surfaces to be painted/
silkscreened are to be finished.
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90a returns
and finished smooth.
5. Entire sign assembly to be securely
fastened to ceiling with heavy duty
Fastener's and additional blocking.
Size of mounting plates and
size / type of fastener to be engi-
neered by structural engineer
licensed with the State of Illinois to
meet maximum load requirements
and detailed on stamped shop
drawings.
6. The Signage Contractor is responsi-
ble for the complete fabrication and
installation of all components of this
signage and is to include the cost to
obtain all permits necessary to
install and maintain it. The Signage
Contractor is to submit detailed shop
drawings indicating all fabrication,
electrical, and installation comp-0-
nents. Actual mounting.situations
may vary by location. Mounting
locations may have additional pip-
ing, cables or other material that
may hinder installation. The Signage
Contractor is responsible to field ver-
ify each location for all existing con-
ditions of the building and site prior
to submitting detailed shop draw-
ings and copy layouts to determine
if modifications or additional sup-
port is required.
a,� . o -Q(9 -X41
. -6 a� 30
The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Ventulett, Stainback &
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revisions
No. Date Issue Description
1 02.20.06 llufletin 12 Revised ST Daignalim
Drawn by: Duane W. farthing
Checked by: lee Jones
Project Designer: Lea Jones
Project Director: Lee Jones
m The Douglas Group. A9 rights reserved.
No part of this document may be reproduced or
utilized in any form without prior written authodra-
tion from The Douglas Group. This document serves
as a device to communicate design Intent only.
Fabrication and Installation of the products repre-
sented herein will be derived from shop drawings
produced by this contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.17.1
Area of Rescue Identity
D I G Project Number:
24043.13
Issue Date:
07.13.06
Ge45-C
'This Sign Type includes ltem. Number(_s).. G312C, G331 C &. G33-4C
0.
0
r;
4'-0'
21/2' 1 3" Il
'ob..._PI �
c
5
Front Elevation
Scale: 1 1 /2e= 1' -0"
O
.� Location Elevation
�Scale: 3/8 " =1' -0"
Notes
1. Sign cabinet to be 1/8" thick olu
minuet cladding seomlessly fabricat-
ed around internal aluminum frame
structure and painted to match P -3
on both faces and sides.
Sign cabinet to be internally illumi --
hated by 10mm high - output C.L.
Designer' C.L. 71- 7100aK -white
neon tubing with 30 mA remote
transformers, with sufficient neon to
provide bright, even illumination of
sign face. All electrical connections
of lighting system from cabinet to
remote transformers and primary
power supply to be through back of
cabinet and be contained in appro-
priate conduit or wireways to meet
all electrical codes. The Signage
Side View
2
Scale: 1 1 /2 "= 1' -0"
C)
Contractor is to provide the appro-
priate conduit and insulators for all
penetrations and all penetrations
are to be completely sealed and
watertight.
The EGL Company, Inc.
100 Industrial Road
Berkeley Heights, New Jersey
07922
Phone 908.508.1111
Fax 908.508.1122
www.egl- neon.com
Estimated Power Supply
Requirements:
( #)- 20 AMP 11 Ov or 277v dedicat-
ed lines, incorporated into building
EMS.
NOTE: This sign is to be con-
nected to the Emergency
Lighting System.
The Signage Contractor to provide
all required remote transformers and
electrical connections and to coordi-
nate primary electrical to each loco-
tion with the General Contractor.
Sign cabinet to have access panel
for maintaining iighting hardware.
Panel to be weather -proof sealed
with countersunk, tamper resistant,
non - corrosive fasteners painted to
match background.
2. letterforms to be 114" thick translu-
cent milky white acrylic with c matte
finish on the first surface. _
Typestyle: Optima Bold, all caps.
Letterforms to be solvent glued to an
additional 1/4" thick back diffuser
panel for mounting. Laminated pieces
to be push-thru routed face of sign
can and the back diffuser panel to
be mechanically fastened thru blind
studs on interior side of sign can.
3. Square to be 1/4" thick translucent
milky white acrylic with applied vinyl
to match V -b on face and edges.
Symbol to be reversed out to show
milky white acrylic.
Square to be solvent glued to an
additional 1/4" thick back diffuser
panel for mounting. Laminated pieces
to be push-thru routed face of sign
can and the back diffuser panel to
be mechanically fastened thru blind
studs on interior side of sign can.
4. All exposed surfaces to be pointed/
silk-screened are to be finished
.smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
eased on crisp, clean, 90a returns
and finished smooth.
5. Entire sign assembly to be securely
fastened to wall with heavy duty fas-
teners and additional blocking. Size .
of mounting plates and size /type of
fastener to be engineered by struc-
tural engineer licensed with the
State of Illinois to meet maximum
load requirements and detailed on
stamped shop drawings.
6. The Signage Contractor is responsi-
ble for the complete fabrication and
installation of all components of this
signage and is to include the cost to
obtain all permits necessary to
install and maintain it. The Signage
Contractor is to submit detailed shop
drawings indicating all fabrication,
electrical, and installation compo-
nents. Actual mounting situations
may vary by location. Mounting
locations may have additional pip-
ing, cables or other material that
may hinder installation. The Signage
Contractor is responsible to field ver-
ify each location for all existing con-
ditions of the building and site prior
to submitting detailed shop draw-
ings and copy layouts to determine
if modifications or additional sup•
port is required.
rl'IIIS IS A ITEM
IS
The DouglaslGrxoup
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I Washington, DC
TVS&A
Thompson, Veritulett, Stainback &
Associates; Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Revision
No. Date Issue Des4tioe
1 04.03.06 Bulletin U tlewflmwing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director. Lee Jones
® The Douglas Group. M rights reserved.
No part of this document may be reproduced or
utilized in any form without prior wriMen authoriza-
tion from The Douglas Group. This document serves
as a device to communicate design intent only
Fabrication and installation of the products repre-
sented herein will.be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.17.2
Area of Rescue Identity
D I G Project Number.
24043.13
Issue Date:
07.13.06
G*45D
This Sign Type includes- Item Number(s): G168
eo
P N
-e-a
t
� E Y
ry � • f
sria n cc e.�': s
N.R f $x{
V, •
a rr n o ca: Fri
; T
2' -0-
_77-
a St
n ra n t
.............
n�
Front Elevation
Sca{e: 1 1 /2 1' -0"
Notes
1. Sign panel to be 1/8" thick alu-
minum painted to match P -3 on
face and edges.
2. Copy to be applied vinyl to match
V -2. Typestyle: Optima Medium,
all caps.
3. Mounting brackets to be 3" x 3"
angled aluminum painted to match
P -3. Brackets to be fully welded to
backside of panel and secured to
post with non - corrosive, countersunk
screws.
4. All exposed surfaces to be painted/
silkscreened are to be finished
smooth, primed and painted with an
egg -shell finish.
All edges and corners to be slightly
1 eased on crisp, clean, 90° returns
and finished smooth.
5. Entire sign assembly to be mounted
to existing 3" x 3" square aluminum
post.
2 6. The Signage Contractor is required
to remove all excavated soil and
clean surrounding area effected by
installation.
7. The,Signage Contractor is responsi-
ble to field verify each location for
all existing conditions of the site
prior to submitting detailed shop
drawings and copy layouts to deter -
minje if modifications or additional
support is required.
3
.The Douglas I Group
3040 Post Oak Blvd., Suite 510
Houston, Texas 77056
713.961.3311
713.961.1256 fax
Houston I 'Washington, DC
TVS&A
Thompson, Ventulett, Stainback $
Associates, Inc.
209 South LaSalle Street, Suite 400
Chicago, Illinois 60604
Village Submittal
Revisions'
No. Date Issue Description
1 04.03.06 Bulletin 12 New Drawing
Drawn by: Duane W. Farthing
Checked by: Lee Jones
Project Designer. Lee Jones
Project Director. Lee Jones
m The Douglas Group. M rights reserved.
No part of this document may be reproduced or
utilized In any form without prior written outhorizo-
Hon from The Douglas Group. This document serves
as a device to communicate design intent only.
Fabrication and Installation of the products repro-
sented herein will be derived from shop drawings
produced by the contracted fabricator.
Takeda Pharmaceutical
Headquarters
Sign Type PKG.18
Van Parking Identity
DIG Project Number.
24043.13
Issue Dote:
07.13.06
GASE
VILLAGE OF DEERFIELD
LAKE AND COOK COUNTIES, ILLINOIS
ORDINANCE NO. 0 -06 -41
AN ORDINANCE APPROVING AN AMENDMENT
TO THE SIGNAGE PLAN FOR TAKEDA PHARMACEUTICALS TO
PERMIT DIRECTIONAL SIGNS WITHIN TAKEDA PARK INCLUDING
NECESSARY SIGN MODIFICATIONS
WHEREAS, the Plan Commission of the Village of Deerfield has held a public hearing on
the application of Takeda Pharmaceuticals North America, Inc. (the "Petitioner ") for approval of. (1)
an amendment to the signage plan for the One Takeda Parkway property located at the northeast
corner of Lake Cook Road and Saunders Road and legally described on Exhibit A attached hereto
(the "Subject Property") to allow certain unlit directional signs identified and described on Exhibit B
attached hereto (the "Directional Ground Signage") to be located and maintained on the Subject
Property as an amendment to the Special Use Industrial Planned Unit Development of the Subject
Property in the I -1 Office, Research and Restricted Industrial District, and (2) approval of a sign
modification to allow the Directional Ground Signage to exceed two (2) square feet in area; and,
WHEREAS, said public hearing was held on July 27, 2006 pursuant to public notice duly
given and published as required by law and conforming in all respects, in both manner and form,
with the requirements of the Zoning Ordinance of the Village of Deerfield; and,
WHEREAS, the Plan Commission, after considering the proposed amendment to the
approved signage plan for the Subject Property, the proposed sign modification and the evidence and
supporting materials offered at said public hearing, has submitted its written report and
recommendation to the President and Board of Trustees of the Village of Deerfield that an
amendment to the approved signage plan for the Subject Property should be approved as an
amendment to the Special Use Industrial Planned Unit Development of the Subject Property in the I-
1 Office, Research and Restricted Industrial District to allow the Directional Ground Signage to be
installed and maintained on the Subject Property, and that said sign modification should be further
approved to allow the Directional Ground Signage to exceed two (2) square feet in area; and,
WHEREAS, the President and Board of Trustees of the Village of Deerfield find that said
amendment to the approved sign plan and sign modification should be approved for the Subject
Property authorizing the Directional Ground Signage, all in accordance with the plans, drawings and
exhibits presented by the Petitioner and attached hereto as Exhibit B hereof;
NOW, THEREFORE, BE IT ORDAINED BY THE PRESIDENT AND BOARD OF
TRUSTEES OF THE VILLAGE OF DEERFIELD, LAKE AND COOK COUNTIES, ILLINOIS, in
the exercise of its home rule powers, as follows:
SECTION 1: That the President and Board of Trustees of the Village of Deerfield do hereby
find that the requested amendment to the approved signage plan for the Subject Property complies
with the requirements and standards set forth in Article 9.02 -C PUD, entitled I -1 Office, Research,
Industrial District Planned Unit Development, and in Article 13 -11 of the Zoning Ordinance of the
Village of Deerfield.
SECTION 2: That an amendment to the approved signage plan for the Subject Property is
hereby authorized and approved as an amendment to the Special Use Industrial Planned Unit
Development of the Subject Property in the I -1 Office, Research and Restricted Industrial District
authorizing and permitting certain unlit directional ground signs identified and described on Exhibit
-2-
B attached hereto (the "Directional Ground Signage") to be located and maintained on the Subject
Property, all in accordance with the plans, drawings and exhibits listed on Exhibit B attached hereto.
SECTION 3: That a modification from the regulations set forth in Article 9, Signs, of the
Zoning Ordinance of the Village of Deerfield is hereby approved for the Subject Property to permit
said Directional Ground Signage to exceed two (2) square feet in area, all in accordance with the
plans, drawings and exhibits listed on Exhibit B attached hereto.
SECTION 4: That the approval and authorization of said amendment to the approved
signage plan for the Subject Property is hereby granted subject to the following additional conditions,
regulations and restrictions: (i) that the construction, maintenance and use of the unlit directional
ground signs hereby approved shall be in accordance with the supporting documents, materials and
exhibits attached hereto and made a part hereof as Exhibit B; (ii) except as otherwise provided
herein, the construction, maintenance and use of the Subject Property shall be in accordance with the
Final Development Plan heretofore approved as a Special Use Planned Unit Development of the
Subject Property in the I -1 Office, Research and Restricted Industrial District, including the signage
plan for the Subject Property as hereby amended; (iii) continued compliance by the Petitioner with
all other applicable provisions of the Zoning Ordinance of the Village of Deerfield.
SECTION 5: That the amendment to the approved signage plan for the Subject Property
hereby approved and authorized as an amendment to the Special Use Planned Unit Development of
the Subject Property shall be binding upon and inure to the benefit of Petitioner and Petitioner's
successors, grantees, transferees and assigns, and any violation of the conditions hereinabove set
forth by Petitioner or its successors, grantees, transferees or assigns shall authorize the revocation of
the amendment Special Use hereby authorized.
-3-
SECTION 6: That the Village Clerk is hereby authorized and directed to record this
Ordinance in the office of the Recorder of Deeds of Lake County, Illinois at Petitioner's expense.
SECTION 7: That this Ordinance, and each of its terms, shall be the effective legislative act
of a home rule municipality without regard to whether such Ordinance should: (a) contain terms
contrary to the provisions of current or subsequent non - preemptive state law; or, (b) legislate in a
manner or regarding a matter not delegated to municipalities by state law. It is the intent of the
corporate authorities of the Village of Deerfield that to the extent that the terms of this Ordinance
should be inconsistent with any non - preemptive state law, this Ordinance shall supersede state law in
that regard within its jurisdiction.
SECTION 8: That this Ordinance shall be in full force and effect from and after its passage,
approval and publication in pamphlet form as provided by law.
PASSED this 5th day of September 2006.
AYES: Benton, Feldman, Rosenthal, Seiden, Struthers, Wylie (6)
NAYS: None (0)
ABSENT: None (0)
ABSTAIN: None (0)
APPROVED this 5th dai
ATTEST:
Village Clerk
Exhibit B
Documents Comprising Amendments to the Signage Plan for Takeda
Pharmaceuticals at the Northeast Corner of Lake Cook Road and Saunders Road
1. Site - Signage Location Plan, sheet EG -OS. 1, dated 4 -3 -06 by TVS Architects.
2. Building 1 Level 01- Location Plan, sheet EG -01.1, dated 11 -7 -05 by TVS
Architects.
3. Building 2 Basement - Location Plan, sheet EG -02.13, dated 11 -7 -05 by TVS
Architects.
4. Garage Level 01- Location Plan, sheet EG -10, dated 1 -16 -06 by TVS Architects.
5. Garage Level 02- Location Plan, sheet EG -11, dated 1 -16 -06 by TVS Architects.
6. Garage Level 03- Location Plan, sheet EG -12, dated 1 -16 -06 by TVS Architects.
7. Site Directional (Large), Sign Type EXT.04, sheet G.9, dated 7 -13 -06 by The
Douglas Group.
8. Site Directional (Small), Sign Type EXT.05, sheet G.10, dated 7 -13 -06 by The
Douglas Group.
9. Loading Dock Bay Identity, Sign Type EXT.07, sheet G.12, dated 7 -13 -06 by The
Douglas Group.
10. Building Address, Sign Type EXT.08, sheet G.13, dated 7 -13 -06 by The Douglas
Group.
11. No Smoking Sign, Sign Type EXT.10, sheet G. 13C, dated 7 -13 -06 by The
Douglas Group.
12. No Trespassing Sign, Sign Type EXT.11, sheet G. 13D, dated 7 -13 -06 by The
Douglas Group.
13. No Fishing Sign, Sign Type EXT.12, sheet G.13E, dated 7 -13 -06 by The Douglas
Group.
14. Building Identity, Sign Type EXT. 13.1, sheet G.13F, dated 4 -5 -06 by The
Douglas Group.
15. Building Identity, Sign Type EXT.13.2, sheet G.13G, dated 4 -5 -06 by The
Douglas Group.
16. Clearance Hit Bar, Sign Type PKG.01, sheet G.27, dated 7 -13 -06 by The Douglas
Group.
17. Clearance Hit Bar (Large), Sign Type PKG.02. 1, sheet G.28, dated 7 -13 -06 by
The Douglas Group.
18. Clearance Hit Bar (Small), Sign Type PKG.02.2, sheet G.29, dated 7 -13 -06 by
The Douglas Group.
19. Clearance Hit Bar, Sign Type PKG.02, sheet G.30, dated 7 -13 -06 by The Douglas
Group.
20. Clearance Hit Bar, Sign Type PKG.02, sheet G.30A, dated 7 -13 -06 by The
Douglas Group.
21. Overhead Directional (Suspended), Sign Type PKG.03, sheet G.31, dated
7 -13 -06 by The Douglas Group.
22. Overhead Directional (Wall Mounted), Sign Type PKG.04.1, sheet G.32, dated
7 -13 -06 by The Douglas Group.
23. Overhead Directional (Wall Mounted), Sign Type PKG.04.2, sheet G.32A, dated
7 -13 -06 by The Douglas Group.
24. Level Identity, Sign Type PKG.06, sheet G.36, dated 7 -13 -06 by the Douglas
Group.
25. Stairwell Identity, Sign Type PKG.10, sheet G.40, dated 7 -13 -06 by the Douglas
Group.
26. Reserved Parking Sign (Panel Only), Sign Type PKG. 12.1, sheet G.43, dated
7 -13 -06 by The Douglas Group.
27. Reserved Parking Sign (Post and Panel), Sign Type PKG.12.2, sheet G.43A,
dated 7 -13 -06 by The Douglas Group.
28. Area of Rescue Identity, Sign Type PKG. 17.1, sheet G.45C, dated 7 -13 -06 by The
Douglas Group.
29. Area of Rescue Identity, Sign Type PKG.17.2, sheet G.45D, dated 7 -13 -06 by
The Douglas Group.
30. Van Parking Identity, Sign Type PKG.18, sheet G.45E, dated 7 -13 -06 by The
Douglas Group.