The URL can be used to link to this page

O-16-04'C VILLAGE OF DEERFIELD STATE OF ILLINOIS ) COUNTIES OF LAKE AND COOK ) SS VILLAGE OF DEERFIELD ) IIIIII IIIIII III IIIII IIIII IIIII IIIII IIIII IIIII IIIII IIIII IIIII IIIII IIIII III III Image!# 061868120031 Type: ORD Recorded: 02/11/2022 at 01:25:26 PM Receipt##: 2022-00013861 Page 1 of 31 Fees: $50.00 Lake County IL Recorder Mary Ellen vanderventer Recorder File7873050 The undersigned hereby certifies that he is the duly appointed Deputy Village Clerk of the Village of Deerfield, Lake and Cook Counties, Illinois, and that the attached is a true and accurate copy of Ordinance 0-16-04 Dated this November 17 2021 Authorizing an Amendment to the Special Use for Briarwood Country Club to Permit Changes to the Paddle Tennis Facilities L-] I L DANIEL VAN DUSEN Deputy Village Clerk Prepared by and after recording return to: Daniel Van Dusen Village of Deerfield 850 Waukegan Road Deerfield, IL 60015 850 WAUKEGAN ROAD DEERFIELD, ILLINOIS 60015 TELEPHONE 847.945.5000 FAX 847.945.0214 0.10.10.10.10.10.10.10.10.10.20.20.20.20.10.10.10.10.10.20.20.30.40.40.40.30.20.10.10.10.20.20.20.30.40.50.80.60.80.60.30.20.10.10.10.10.20.20.40.30.30.30.50.60.80.81.01.71.10.70.50.30.20.10.10.20.30.71.11.20.90.70.70.91.31.81.72.51.81.40.90.50.20.10.10.10.20.40.50.61.73.64.53.01.51.21.52.43.93.52.61.81.71.40.70.40.20.10.10.20.30.51.32.32.54.316.823.29.94.32.12.24.45.35.72.62.32.52.11.30.60.30.10.10.10.20.50.81.13.48.214.013.647.971.631.69.94.03.14.37.86.33.52.82.72.31.80.90.40.20.10.10.10.10.20.41.43.03.87.732.981.958.846.387.880.119.87.03.85.28.58.85.23.13.13.62.41.20.70.40.20.10.10.20.30.40.83.49.519.520.160.2157.6130.452.774.884.246.610.94.34.37.28.410.16.94.84.93.52.11.20.50.30.10.10.10.10.30.81.82.56.738.5104.368.350.1117.8196.196.341.683.168.814.44.33.24.86.16.88.85.24.22.72.21.70.80.40.20.10.10.10.20.51.95.316.517.660.4166.9138.862.382.4147.1150.255.736.238.99.23.42.33.04.06.37.77.03.52.62.72.11.20.60.30.10.10.10.30.72.912.664.362.438.2106.2100.647.295.3127.055.113.15.83.71.91.62.23.04.97.56.94.03.02.51.71.40.70.30.10.10.30.72.711.565.390.255.763.4141.6163.164.235.344.818.812.84.21.21.11.21.62.64.87.98.95.72.92.32.01.50.70.30.10.10.30.61.77.124.9104.374.236.180.5125.555.116.911.88.62.89.00.90.70.71.01.83.46.38.28.95.83.52.52.01.00.40.20.10.20.41.13.612.147.9100.353.022.634.824.718.76.02.82.87.14.10.40.50.61.02.03.95.35.46.22.51.61.10.70.40.20.10.30.71.75.315.554.536.010.522.263.152.016.94.24.63.80.50.30.30.40.71.22.12.63.22.42.40.90.70.50.30.10.20.40.92.15.511.824.241.424.078.798.128.38.69.61.00.40.20.20.30.40.71.11.31.41.30.90.80.70.40.20.30.51.12.68.142.075.055.844.2101.974.616.06.81.20.40.20.20.20.30.50.50.60.60.60.60.50.30.20.40.71.55.620.592.588.732.070.7106.733.85.91.40.40.20.10.10.20.20.20.30.30.30.30.20.41.03.111.042.287.673.629.153.628.65.01.10.30.20.10.10.10.10.10.10.10.10.30.61.65.216.472.556.318.69.45.72.40.80.20.10.10.10.10.20.40.82.06.315.925.17.01.31.00.80.30.20.10.10.20.40.81.93.84.02.30.40.10.10.10.10.20.40.60.81.00.60.20.10.20.20.20.30.20.10.10.10.10.10.10.10.10.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0208.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.50.511111111111111111111111111111111111111111115555555555555555555555555555555555555555551010101010101010101010101010101010101010101010101010Plan ViewScale - 1" = 60'LUMINAIRE SCHEDULESymbol Label QuantityManufacturerCatalogNumberDescription LampNumberLampsFilenameLumens PerLampLight LossFactorWattageXA2 LithoniaLightingKVF2 400MSR4WFL(PROBE)SQUAREAREA LIGHT,SR4WDISTRIBUTION, FLATLENS. MEETSTHE'NIGHTTIMEFRIENDLY'CRITERIAONE 400-WATT CLEARED-28METALHALIDE,HORIZONTALPOSITION.1 KVF2_400M_SR4WFL_(PROBE).ies32000 1 462XB32 GELIGHTINGSOLUTIONSwww.gelightingsolutions.comPSGV40M___E0___POWR-SPOTW/GLAREREDUCTION1; 400W MH,CLEAR ED37,AXIAL1 ge450330_tcm201-62225.ies33100 1 459E8 USAIllumination,Inc3021-B1-S-10-LRTD4-9033-C3-30KS-25-NC-120V MOD to16W, 27KSFormed steelhousing,specularreflector,glass lenswith whitetrim7 whtiteLEDs1 3021-B1-S-10-LRTD4-9016-C3-27KS-25-MOD.ies1304.516 1 16PHOTOMETRIC PLANPADDLE TENNIS COURTS FACILITYBRIARWOOD COUNTRY CLUB445 WAUKEGAN ROADDEERFIELD, ILLINOIS 60015DesignerGAFDate10/22/2015ScaleDrawing No.Summary1 of 1 OUTDOOR KVF2-M-S Catalog Number Notes Type KVF2 Series Wattage Distribution Voltage Ballast Mounting KVF2 Metal halide 175M1 200M2 250M3 320M2 350M1,2 400M3 450M1, 2 750M2 775M2,4 875M2,4 1000M5 High pressure sodium6 250S 400S 750S 1000S5,7 Vertical lamp:8 SYM__Symmetric square ASY__Asymmetric VFA__Vertical forward throw automotive Horizontal lamp:8 R2__Type II R3__Type III High-performance horizontal lamp:9 SR2FL Type II roadway SR3FL Type III asymmetric SR4SCFL Type IV forward throw, sharp cutoff SR4WFL Type IV forward throw, wide 120 20810 24010 277 347 48010 TB11 23050HZ12 (blank)Magnetic ballast CWI Constant wattage isolated SCWA Super CWA ballast Note: For shipments to U.S. territories, SCWA must be specified to comply with EISA. Type SP__Square pole RP__Round pole WB__Wall bracket WW__Wood pole or wall bracket PT__Post top; opentop pole Size13 06 6” arm 09 9” arm 12 12” arm 4 4” OD 45 4.5” OD 5 5” OD 6 6” OD ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVF2 400M SYMDL TB SCWA SP09 LPI Options Finish20 Lamp (required) Shipped installed in fixture SF Single fuse 120, 277, 347V14 DF Double fuse 208, 240, 480V14 KW1 KiloWatch® 120V control relay14, 15 KW4 KiloWatch® 277V control relay14, 15 PER NEMA twist-lock receptacle only (photocontrol not included) QRS Quartz restrike system16 QRSTD QRS time delay12, 16 EA Embossed accent EHS External houseside shield (matches fixture finish)17, 18, 19 EHSB External houseside shield black (painted black to maximize light control)17, 19 CSA Listed and labeled to comply with Canadian Standards NOM NOM certified12 INTL Available for 175M probe start ship- ping outside the U.S. REGC1 California Title 20 effective 1/1/2010 Shipped separately17 VG Vandal guard18, 19 PE1 NEMA twist-lock PE (120,208,240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap (blank)Dark bronze DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White Super Durable Finishes DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white LPI Lamp included L/LP Less lamp FEATURES & SPECIFICATIONS INTENDED USE — Use for parking lots, streets and surrounding areas. CONSTRUCTION — Heavy gauge die-formed aluminum housing is fabricated using robotic continuous seam-weld process for weather-tight integrity. Integral structural support plate for mounting arm and electrical components ensures rigidity and strength. Hinged aluminum door frame incorporates stainless steel hardware. Continuous silicone gasketing surrounds lens for weather-tight seal. Optional tool-less hardware is available to maximize installation and maintenance ease. Lens: Thermal shock resistant tempered glass lens. Choice of contoured drop lens or flat lens is available in standard product. Standard finish is dark bronze corrosion resistant electrostatically applied powder paint. Optional linear embossed accent reveals are available. OPTICS — Most flat lens configurations meet full-cutoff criteria. See www.lithonia.com for details. Vertical- lamp reflectors are 1-piece spun and formed anodized aluminum. Specialized distributions available for either drop lens or flat lens. Reflectors are independently designed to optimize light output for the lens type. Horizontal-lamp reflectors also available. ELECTRICAL — All electrical components are mounted to a heavy-gauge plate to maximize heat dissipation and ensure structural integrity for optimal component life. Ballast: Constant wattage autotransformer. Metal Halide: Super CWA (pulse start ballast), 88% efficient and EISA legislation compliant, is required for 175- 400W (SCWA option) for US shipments only. CSA, NOM or INTL required for probe start shipments outside of the US. Pulse-start ballast (SCWA) required for 200W, 320W, 350W, 450W, 750W, 775W or 875W. Ballast is 100% factory-tested. Socket: Mogul-base porcelain socket with copper alloy, nickel-plated screw shell and center contact. Vertically-oriented for types SYM, ASY, and VFA distributions. Horizontal position-oriented for types R2, R3 and R4. UL listed 1500W-600V, 4kV pulse rated. Reflectors are rotatable and interchangeable. INSTALLATION — Extruded aluminum arm with integral splice compartment. Standard arm is 9” in length. Aluminum fitter for 4" to 6" OD poles. LISTINGS — UL Listed to US and Canadian safety standards (see Options). NOM Certified (see options). UL listed for 25°C ambient and wet locations. Optical chamber IP65 rated. WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice. Square Area Lighting KVF2 METAL HALIDE: 175-1000W HIGH PRESSURE SODIUM: 250-1000W 20' to 40' Mounting Notes 1 These wattages do not comply with California Title 20 regulations. 2 Must be ordered with SCWA. 750M not available with 347v or 480v. 3 These wattages require the REGC1 option to be chosen for shipments into California for Title 20 compliance. 250M REGC1 in not available in 347 or 480V. 4 Must specify voltage (120, 208, 240, 277, 347 or 480). Not available in TB. 208, 240, and 480v not available in Canada. Use reduced jacketed lamp. 5 Available with ASY or SYM only. 6 Not available with SCWA. 750S – must specify voltage (120, 208, 240, 277, 347 or 480); available with SYM, ASY or VFA only. 7 Standard ED25 lamp with drop lens. 8 For drop lens, specify DL. For flat lens, specify FL. Example: SYMDL or R2FL. 9 Not available with 750M, 775M, 875M, 1000W or post top. 10 Must specify CWI for use in Canada. 11 Optional multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada). 12 Consult factory for available wattages. 13 12" arm required when two or more luminaires are oriented on a 90° drilling pattern. 14 Not available with TB. Must specify voltage. Specifications Square: 21-1/2 (54.6) Flat lens height: 14 (35.5) Drop lens height: 17 (43.2) Arm mount EPA: 2.8 ft2 (0.25 m2), incl. arm *Weight: 53 lbs (24 kg) * Weight as configured in example below. Mounting Option Drilling Template SPxx, RPxx, 5 WBxx 6 WWxx 7 Post top EPA: 2.8 ft2 (0.25 m2) Weight: +2 lbs to * Overall Height: 22-3/4 (57.8) Dimensions in inches (centimeters)unless otherwise specified. Square FH DH 15 Available in vertical lamp orientation only for 200-400M SCWA. Any orientation on 250S or 400S only. 16 Maximum allowable wattage lamp included. 17 May be ordered as an accessory. 18 Specify finish when ordered as an accessory. 19 Prefix with KVF2 when ordering as an accessory. Order as KVF2EHSFL U for high-performance reflectors. 20 See www.lithonia.com/archcolors for additional color options. Accessories: Tenon Mounting Slipfitter* Order as separate catalog number. Tenon O.D.One Two@180°Two@90°Three@120°Three@90°Four@90° 2-3/8 (6.0)T20-190 T20-280 T20-290 T20-320 T20-390 T20-490 2-7/8 (7.3)T25-190 T25-280 T25-290 T25-320 T25-390 T25-490 4 (10.2)T35-190 T35-280 T35-290 T35-320 T35-390 T35-490 * Arm mount only. Mounting Height Correction Factor (Multiply the fc level by the correction factor) 25 ft.= 0.64 30 ft.= 0.45 40 ft= 0.25 KVF2-M-S OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-279-8041 Fax: 770-918-1209 www.lithonia.com ©2007-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/07/15 Notes 1 Photometric data for other distributions can be accessed from the Lithonia Lighting Web site (www.lithonia.com) 2 For electrical characteristics, consult outdoor technical data specification sheets on www.lithonia.com. 3 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change. KVF2 Arm-Mounted Area Lighting DISTANCE IN UNITS OF MOUNTING HEIGHTISOILLUMINANCE PLOT (Footcandle) 400W lamp, rated 50000 lumens. Footcandle values based on 20' mounting height. Classification: Type II, Medium, Full Cutoff -2 -1 0 1 2 3 4 012345 6 5 2.51.510.50.25 TEST NO: LTL11324KVF2 400S R3FL DISTANCE IN UNITS OF MOUNTING HEIGHTISOILLUMINANCE PLOT (Footcandle) 1000W lamp, rated 110000 lumens. Footcandle values based on 20' mounting height. Classification: Type IV, Short, Cutoff -2 -1 0 1 2 3 4 012345 6 5 2.5 1.51 0.5 TEST NO: LTL11381KVF2 1000M ASYDL DISTANCE IN UNITS OF MOUNTING HEIGHTISOILLUMINANCE PLOT (Footcandle) 250W pulse start metal halide lamp, rated 22500 lumens. Footcandle values based on 20' mounting height. Classification: Type II, Short, Full Cutoff -3 -2 -1 0 1 2 3 4 012345 6 5 2.51.51 0.5 0.25 TEST NO: LTL11250PKVF2 250M SR2FL DISTANCE IN UNITS OF MOUNTING HEIGHTISOILLUMINANCE PLOT (Footcandle) 400W pulse start metal halide lamp, rated 42000 lumens. Footcandle values based on 20' mounting height. Classification: Type IV, Short, Full Cutoff -3 -2 -1 0 1 2 3 4 012345 6 55 2.51.51 0.5 0.25 TEST NO: LTL9432PKVF2 400M SYMFL Existing Mounting Height New Mounting Height 2 = Correction Factor GE Lighting Solutions imagination at work GE Lighting Solutions Sports & Stadium Lighting Powr-Spot™ (PSGN & PSGV) Applications • Recreational and competition sports fields at all levels • General floodlighting where long setbacks or high mountings require maximum optical performance • Especially suitable at sites requiring glare reduction and light trespass limitation Housing • Die-cast aluminum ballast housing with polyester powder gray paint finish inside and out Finish • Polyester powder gray paint finish Ratings • 1598 Listed Suitable For Wet Locations Reflectors • Enclosed, gasketed, filtered optical with configured, ALGLAS™ finish on 20-inch (508mm) diameter aluminum reflector and tempered glass closure Unique Features • Thermal separation of ballast from socket and lamp • Removable cover for access to ballast and wiring compartment • No-weep-hole condensate drain when aimed down • Built-in cable and strain relief bushing • Heavy gauge steel trunnion with aiming reset stop • Corrosion-resistant hardware • Position oriented socket available for “minimum” tilt factor lamp–contact factory • Remote ballasted system available – contact factory • Mogul base socket – E39 standard GE Sports Flood Lighting is the premium lighting solution for professional arena applications. Combining state-of-the- art lamp, optical and ballast technology, packaged together for unmatched light output and efficiency, with excellent visibility for player, spectators and television broadcasting. Product Features / Ordering Number Logic Powr-Spot™ (PSGN & PSGV) _ _ _ _ - _ _ - _ - _ - _ - _ - _ _ - _ _ _ - _ PROD. ID OPTIONSWATTAGELIGHTSOURCEBALLASTTYPETRUNNIONTYPEREFLECTORID OPTICALREFLECTORVOLTAGE PSGN = Powr-Spot III Floodlight with 20-in. (508mm) diameter Reflector and with Internal Glare Reduction Louvers Mounted on Door PSGV = Powr-Spot III Floodlight with 20-in. (508mm) diameter Reflector and with External Glare Reduction Visor Mounted on Door S = HPSM = MH Standard: Lamp not included. See DimensionsHD0 = Heavy Duty 20-in. (508mm) DiameterGP0 = General Purpose 20-in. (508mm) Diameter 60Hz0 = 120/208/ 240/277 Multivolt1 = 1202 = 2083 = 2404 = 2775 = 480D = 347T = 220 50Hz6 = 220Y = 240 F = Fusing (Not available with multivolt) nor with Instant Hot Restart)P = Pre-wired with 6-ft (2M) #14/3 75 = 75001 = 100051 = 1500 See Ballast and Photometric Selection Table A = Autoreg Select ID. from Photometric Selection Table.B0C0D0E0 1 = Straight2 = Angled3 = Long (for SportsStar)4 = Straight w/CAA-001 PSGNPSGV NOTE: N/A = Not Available *347 volts not available in multivolt. C/F = Contact factory For indoor indirect lighting applications with 1000 watt or greater, GE recommends replacing tempered front glass lens with wire guard accessory WG-PSFO. For facade or applications with aiming fixture above horizontal, contact factory. Ballast and Photometric Selection Table All light sources are clear unless otherwise indicated. All Ballasts are Autoreg. Designate 20-inch (508mm) Reflector by Reflector ID. Photometric Curve Number 35-xxxxxx and Beam Angle in Degrees Light Product ID Wattage Source A2 B0 C0 D0 E0 PSGN 400 HPS N/A 450593 (37X30) 450401 (50X39) 450575 (60X49) 450560 (76X64) 750 HPS N/A N/A N/A 450535 (73X53) 450538 (105X78) 400 MH N/A 450524 (31X27) 450337 (54X19) 450529 (99x74) N/A 1000 MH 452775 (23X22) 452788 (39x36) 452787 (55X50) 452790 (86X67) 452789 (107x91) 1500 MH 452742 (23X22) 452754 (43X37) 452757 (60X49) 452756 (61X52) 452755 (104X91) PSGV 400 HPS N/A 450329 (37X34) 179263 (52X47) 450327 (61X57) 450328 (81X74) 750 HPS N/A N/A N/A 450533 (79X75) 450536 (105X96) 400 C/F N/A C/F C/F C/F C/F 1000 MH 452774 (23X23) 452791(40X41) 452792 (55X55) 452794 (84X75) 452793 (111X97) 1500 MH 452747 (24X23) 452761 ( 41X40) 452760 (57X53) 452758 (62X59) 452759 (94X91) OLP-2980 (Rev. 05/17/12) GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1 - 8 8 8 - 6 9 - 4 3 - 5 3 3 GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. Product Dimensions Powr-Spot™ (PSGN & PSGV) DATA• Approximate Net Weight: 55-65 lbs (25-29 kgs) • Effective Projected Area: PSGN 2.7* sq ft max (.24* sq M max) PSGV, PSGC 3.25 sq ft max (.30 sq M max) *When aimed 30° down 16.000 in. (407mm)12.531 in. (318mm) 33.906 in. (861mm) 20.700 in. (526mm) 7.969 in. (202mm) 10.42 in. (265mm) 9.47 in. (241mm) 1.07 in. (27mm) 3.04 in. (77mm) DELIVERED PERFORMANCE 1126 River Road New Windsor, NY 12553 www.usailighting.com info@usailighting.com © 2015. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/27/2015 T 845–565–8500 F 845–561–1130 HOW TO SPECIFY BeveLED 2.1 Recessed Downlight - BeveLED 2.1 is the most complete recessed LED downlight product family available from USAI Light- ing, now with more BeveLED trim ﬁ nishes, LED classic white color temperatures, innovative housing styles, and dimming driver options than before. With industry-leading performance, BeveLED 2.1 can provide a solution for any project - commercial, corporate and residential installations. 3021 Round Downlight 1” or 2-1/2” Regress B1 1" Regress Bevel, Painted Die Cast Matches Flange Finish AB1 1" Regress Bevel, Black Anodized AC1 1" Regress Bevel, Clear Matte Anodized AB2 2-1/2" Regress Bevel, Black Anodized 3 AC2 2-1/2" Regress Bevel, Clear Matte Anodized 3 3 Not for use with FT or NCSM housing. F Frosted S Solite (provided standard) 01 Clear Matte (AC Bevel only) 02 Black Anodized (AB Bevel only) 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #) TRIM ORDERING INFORMATION LRTD4 9009 9W LED, 9012 12W LED, 9016 16W LED, 9024 24W LED, 9033 33W LED, See performance chart for precise lumen information. C3 FT Flat Housing New Construction NCSM New Construction Narrow Width NC New Construction, all in one CP Chicago Plenum IC Insulation-Contact Rated / Airtight See emergency solutions chart for EM options with these housings HOUSING ORDERING INFORMATION 22KS 2200K, 80+ CRI 27KS 2700K, 80+ CRI 30KS 3000K, 80+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI 27KH 2700K, 90+ CRI 30KH 3000K, 90+ CRI 2 Step MacAdam ellipse is standard for all 25 25° beam 50 50° beam 90 90° beam 120V 277V 120V 347V For use with 120V or 277V DIML2 0-10V dim, 10% (provided standard) DIML4 Lutron A 3-wire/ECO, 1% DIML4E Lutron 5 ECO, 5% 4 DIML4H Lutron H ECO, 1% Fade 4 DIML6A EldoLED 0-10V Lutron, 0.1% DIML6B EldoLED 0-10V Linear, 0.1% DIML7 EldoLED DALI, 0.1% DIML8 EldoLED DMX, 0.1% 5 For use with 120V only DIML3 Lutron A 2-wire, 1% 120V only DIML9 TRIAC 2-wire, 15% 120V only 4, 5 DIML10 ELV 2-wire, 15% 4,5 120V only For use with 347V only DIML15 0-10V dim, 1% 347 only CB27 27" C-Channel Bars CB52 52" C-Channel Bars EML Emergency battery 6 EMLW Emergency battery, wet location 6 TZ TechZone ceiling compatible 7 6 See emergency solutions chart for more details on EM options. 7 With NCSM housing only Ordering Example: Specify trim code and housing code to order: Example : 3021W - B1- S - 10 - LRTD4 - 9012 - C3 - 27KS - 50 - NC - 277V - DIML2 - CB27 TRIM – BEVEL STYLE – LENS – FLANGE FINISH HOUSING CODE – – COLOR – REFLECTOR LRTD4 WATTAGE – ENGINE CODE C3 – HOUSING TYPE – – DIMMING DRIVER OPTIONS – ACCESSORIES Performance based on 3000K 90+ 90+ 90+ 90+ 90+ 80+ HIGH 80+ HIGH 80+ HIGH 80+ HIGH 80+ HIGH Color Rendering Index CRI CRI CRI CRI CRI CRI CRI CRI CRI CRI Lumens per Watt 100 80 86 72 86 72 80 66 71 61 Source Lumens 1150 950 1300 1075 1725 1425 2400 2000 3025 2500 Delivered Lumens 850 650 1025 850 1375 1150 1925 1600 2400 2000 Color Consistency 2-Step MacAdam Ellipse 9 Watts 12 Watts 16 Watts 24 Watts 33 Watts 3021 ______ OPTION W Wet location 1 EML Integral Emergency Test Switch 2 TZ TechZone (NCSM only) 1 Wet location, use with B1 trims only. 2 Use with NC housing only N/A with 2” regress BeveLED 2.1 DOWNLIGHT 90+ 90+ 80+ 80+ HIGH 80+ HIGH 80+ 80+ Color Rendering Index CRI CRI CRI CRI CRI CRI CRI Multiplier for Lumen Output 0.72 0.94 0.78 1.00 .78 1.00 1.06 2200K 2700K 3000K 3500K 4000KCCT MULTIPLIER USAI ® Lighting 90+ CRI is not available for 2200K, 3500K, or 4000K 4 N/A with 9W 5 N/A with 33W BeveLED® 2.1 PROJECT INFORMATION PROJECT DATE TYPE 3021 1" Regress 2-1/2" Regress DOWNLIGHT 1" Regress 2-1/2" Regress Flange Finish Color area Bevel Finish Color area 41⁄2" Ø 31⁄2" Ø 1" Regress 51⁄2" Ø 41⁄2" Ø 21⁄2" Ø 21⁄2" Regress 51⁄2" Ø SELECT ONE VOLTAGE Briarwood Country Club Paddle Tennis Addition 2015.10.19 E THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum LED life. Ambient temperatures at ﬁ xture location should not exceed 40°C during normal operation. FIELD REPLACEABLE DRIVER: 0-10V, 100%-10% solid state electronic constant current driver with a high power factor provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. DIMMING OPTIONS: Multiple dimming drivers available. See compatibility chart attached. Some on-time delay may be experienced depending on control system used. Note: DIML6A logarithmic control is intended for use with Lutron control systems; DIML6B linear control is intended for use with non-Lutron controls. DIML15 and DIML6 dimming drivers source 2mA. EMERGENCY: Fixtures provided with an integral test switch are provided with a hole in the glass lens as per the drawing above. Fixtures provided with a remote test switch are provided with a 24” lead length for location of the test switch. Fixtures that have no USAI EM option may be connected to an inverter (by others) for emergency lighting. SPECIAL NOTE FOR NCSM HOUSING: DIML8 cannot be combined with EM options in NCSM housing. See emergency solutions chart for more information on EM test switches and servicing. 3021 TRIM: 4-1/2" round aperture with a 1" regressed bevel and 1/2" ﬂ ange, retained by two mounting clips. Die cast aluminum bevel is self-ﬂ anged and is available in white, statuary bronze, black, and metalized grey ﬁ nishes. Also available in black anodized or clear matte anodized bevel, with self ﬁ nish or with contrasting painted ﬂ ange. 2-1/2" regress available for maximum glare control. Custom color ﬂ anges available (provide RAL#). TRIM LENS: Trim is shipped with integral solite lens standard; frosted lens available as an option. REFLECTOR: Interchangeable precision injection molded specular polycarbonate reﬂ ector optimized for 25°, 50° or 90° beam distribution. FIELD REPLACEABLE LIGHT ENGINE: Available in 5 lumen packages: 9W, 12W, 16W, 24W and 33W. Engine is ﬁ eld replaceable through the aperture without tools. See performance chart for precise lumen output information. COLOR: BeveLED 2.1 is available in 5 color temperatures (2200K, 2700K, 3000K, 3500K, 4000K). All color options are tightly binned for ﬁ xture-to-ﬁ xture color consistency within a 2-Step MacAdam Ellipse. 80+ color rendering index provided standard. 90+ CRI available for 2700K and 3000K CCTs. RATED LIFE: Based on IESNA LM80-2008 50,000 hours at 70% lumen maintenance (L70). 1126 River Road New Windsor, NY 12553 www.usailighting.com info@usailighting.com © 2015. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/27/2015 T 845–565–8500 F 845–561–1130 MOUNTING: Butterﬂ y brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14” to 24” centers. C-channel bars are optionally available for acoustical ceiling applications. HOUSING: Fabricated of 20 ga. galvanized steel with thru wire J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit wiring. NCSM with TZ option is compatible with TechZone ceiling systems. When using DIML8, NCSM housing can NOT be used with thru-branch circuit wiring. MAXIMUM CEILING THICKNESS: As per drawings above. CEILING CUT OUT: 5-1/16”Ø LISTINGS: Dry/Damp. Wet location option available with B1 trim only. NRTL/CSA-US tested to UL standards. IBEW union made. Energy Star Qualiﬁ ed. CEC / Title 24 Compliant. WARRANTY: 5 years NOTES: • Not for use in corrosive environment. • Use of pressure washer voids warranty. PHOTOMETRICS: Consult factory or website for IES ﬁ les. Tested in accordance with IESNA LM79-2008. ADDITIONAL TRIM INFORMATION BeveLED® 2.1 DOWNLIGHT SPECIFICATIONS USAI ® Lighting HOUSING INFORMATION New Construction Universal Style Housing - NC New Construction - Narrow Width - NCSM 53/4"43/4" 1 - 23/16" 22(Plan View) 19" (Plan View) 83/8" Chicago Plenum (24W and less) - CP IC / Airtight (24W and less) - IC 13" 221/8" (Plan View) 7" 185/8" (Plan View) 85/8" 11/8" Chicago Plenum (33W) - CP IC / Airtight (33W) - IC Shown with EM option 81/4" 22(Plan View) 19" (Plan View) 83/8" 13" 7" 11/8" 221/8" (Plan View) 7" 185/8" (Plan View) 13" 7" 11/8" 221/8" (Plan View) 7" 185/8" (Plan View) 1" Regress 1" Regress - TechZone Compatible 41⁄2" Ø 31⁄2" Ø 51⁄2" Ø Flange Finish Color area Bevel Finish Color area 41⁄2" Ø 31⁄2" Ø 1" Regress 513⁄16" Ø 81/4” New Construction Flat Housing - FT 71/4” 19" (Plan View) 16" (Plan View) 23/4” 11/4" 4” EM Integral Remote Inverter Housing SERVICE Test Switch Test Switch By Others FT N/A X NCSM* Above ceiling X access required NC, 25º or 50º optic Through aperture X NC, 90º optic Through aperture X NC Wet Location Through aperture X CP N/A X IC N/A X 2-1/2” Regress Through aperture X 3021 Emergency Solutions EM ﬁ xtures that are provided with an integral test switch are shipped with a hole in the glass lens for access. Refer to “EMERGENCY SOLUTIONS” chart to ﬁ nd out which ﬁ xtures have an integral test switch. * NCSM + DIML8 cannot be offered with EM